Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 106 to 120 of 943
-
4th June 2010, 06:08 PM #106Enthusiatic Amateur
- Join Date
- Jun 2007
- Location
- Toowoomba
- Posts
- 144
Hi TS,
This process must be driving you balmy!
I'm just confirming that we are OK for the blade for my Stanley 60 1/2 block plane.
Blade is 1 3/8" (35mm) wide and has three slots.
I did ask for a cap iron and screw for this but, of course, this plane doesn't have a cap iron, so scrap that from my order please.
The order for 2 x 2" blades, cap irons and screws for the other two planes.
Cheers
Brian
-
4th June 2010 06:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th June 2010, 11:04 PM #107
Stanley block plane
Helmut
photo and blade dimensions attached
-
6th June 2010, 11:49 AM #108Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
-
6th June 2010, 12:57 PM #109
Hi Stu,
Yes I would be interested in combining postage (and payment costs). However we may be able to do even better than that. Seanz MAY (possibly, maybe) be able to collect them for us, depending on timing. He was able to collect last order, which was great.
With regard to payment : the banks charge around $20 - $25 per transaction to transfer funds to Aussie, so If we got together around payment time we could combine payment and share that cost proportionally.
PM me closer to the time and we'll see what we can do.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
6th June 2010, 02:29 PM #110
NZStu I have added you to the list.
Another option, is to use paypal, virtually no charges. We have used it successfully for previous orders, for members in Canada and the USA.
-
7th June 2010, 09:22 AM #111Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
-
7th June 2010, 09:48 AM #112
-
9th June 2010, 03:13 AM #113
Hi TS,
I'm looking at getting in on this buy as well and hope to get about 8 blades - for a near complete set of type 6 stanley bedrocks :0) . Can you please pencil me in and I'll confirm this weekend when I get back out in the shed.
Cheers
Dave W.Some give pleasure where ever they go, others whenever they go!
-
9th June 2010, 02:35 PM #114Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Hi TS,
Can you add to my order:
1. one off 2 & 3/8" blade, chip breaker and bevel grinding
2. bevel grinding to my existing order (which was for a #4 with chip breaker).
ThanksCheers, Ern
-
12th June 2010, 04:58 PM #115
-
13th June 2010, 10:15 AM #116Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
-
13th June 2010, 03:36 PM #117
STU I have updated your order.
We are now at 149 blades allocated.
Once I hear back from old gunny and Gordon, then I think we should be at about 170 blades and we will start the ball rolling.
-
13th June 2010, 05:46 PM #118
Hi TS,
If you're still trying to make up numbers I'll jump in with a request for
1x 2" and 1x 2 3/8" for stanley record, both with cap irons and bevelled. I've got to the point where I'd like to play around with some blade upgrades.
Thanks,
Franklin
-
13th June 2010, 05:51 PM #119
Hi Franklin - I have added you to the list.
-
13th June 2010, 07:36 PM #120
A couple more if there is room please Helmut
2 x 2" blades
2 x 2" cap irons
2 x 2 3/8" blades
2 x 2 3/8" cap irons
All blades bevelled please.
Similar Threads
-
Stanley Bench Planes Replacement Blade Bulk Order
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 1385Last Post: 21st September 2009, 08:30 PM -
How to install an old wooden plane blade into a stanley.
By JDarvall in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 2nd September 2006, 06:46 PM