Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 285
-
13th July 2009, 04:22 PM #1
Third Plane Blades for Wooden Hand Planes Batch Order
I have been getting PM's from members asking me to run another batch order for wooden hand planes. So here we go again.
The steel will be M2, the blade thickness will be 4 mm or 6 mm in a wide variety, widths, and lengths, to suit virtually every need.
Here are the size, thicknesses, and prices, that will be on offer.
- 25 x 4 x 80 mm @ $41.00
- 30 x 4 x 80 mm @ $41.00
- 40 x 4 x 50 mm @ $41.00
- 40 x 4 x 100 mm @ $43.00
- 40 x 4 x 150 mm @ $46.00
- 40 x 4 x 200 mm @ $49.00
- 50 x 4 x 60 mm @ $41.00
- 50 x 4 x 100 mm @ $43.00
- 50 x 4 x 150 mm @ $46.00
- 50 x 4 x 200 mm @ $49.00
- 50 x 6 x 100 mm @ $48.00
- 50 x 6 x 150 mm @ $53.00
- 50 x 6 x 200 mm @ $58.00
- 60 x 6 x 100 mm @ $50.00
- 60 x 6 x 150 mm @ $56.00
- 60 x 6 x 200 mm @ $62.00
Per usual the steel will come from Bohler in Melbourne. The heat treating will be by Sutton Tools, and the milling and grinding will be done by Alco. The blades will be laser cut from a sheet, using the same tombstone theme used for the Stanley Plane Blades.
I have over estimated the cost, based on previous cost's we had for them in the past, plus a safety margin, so the price will be very stable.
Attached is the usual pdf's.
The ETA for this order is three months. I do not want it to drag on for to long. So get your allocation in as soon as possible.
-
13th July 2009 04:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th July 2009, 04:58 PM #2
I'm there Helmut.
I'd like to change my order if you don't mind. Please delete what you have and add the following for me:
1 of -> 40 x 4 x 100 mm @ $43.00
1 of -> 60 x 6 x 150 mm @ $56.00
2 of -> 50 x 6 x 150 mm @ $53.00
Many thanks Helmut.
Dave."Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so."
- Douglas Adams
-
13th July 2009, 06:01 PM #3Senior Member
- Join Date
- Jun 2007
- Location
- Queanbeyan NSW
- Posts
- 231
Blades for woodies
I see that I am on the pdf of the 05 order list - I am still interested in these blades
Neil
-
13th July 2009, 06:26 PM #4
Hi TS,
I am on the list for a 6x60x200 blade, could you delete that one, I wont require that size now.
I will work out what I will need and get back to you,
thanks Ironwood.
-
13th July 2009, 06:29 PM #5
Thumbsucker,
Been intending having a go at a plane one day. Is 4mm thick enough to get by without a chipbreaker. Thinking of a scrub plane for hardwoods. If so a 40x4x150 please.
Regards
John
-
13th July 2009, 06:36 PM #6
-
13th July 2009, 08:08 PM #7
I'll change it to:
50x6x100
50x6x150
50x4x100
1 of each
-
14th July 2009, 04:08 AM #8Senior Member
- Join Date
- May 2008
- Location
- Vermont, VIC
- Posts
- 238
G'day TS,
I would like to change my order,
1 of 50 x 4 x 60 @ $41 each
1 of 50 x 4 x 100 @ $43 each
2 of 50 x 6 x 100 @ $48 each
Cheers
GUNN
-
14th July 2009, 09:56 AM #91/16"
- Join Date
- Mar 2007
- Location
- Adelaide South Australia
- Posts
- 544
T S
I would like to add 1 more blade to my order to total 3 blades as follows.
40x4x100
50x6x150
60x6x100
Thank you
MarkDon't force it, use a bigger hammer.
Timber is what you use. Wood is what you burn.
-
14th July 2009, 05:45 PM #10
Thumbsucker,
I would be having a handle at least, and perhaps a knob. Have not settled on a definate profile but intend having a bit of heft to help the work along.
Regards
John
-
14th July 2009, 10:01 PM #11
TS
I didn't put in for the original order (list attached to post #1 above) but if possible, I'd like 1 blade 50 x 4 x 100 mm @ $43.00 for my HNT Gordon Jack plane.
-
16th July 2009, 03:02 AM #12
Hi TS,
Can I please get;
Qty 1, 50 x 4 x 150 mm @ $46.00
Qty 2, 50 x 6 x 150 mm @ $53.00
Qty 1, 60 x 6 x 150 mm @ $56.00
Gunna have a go at this plane makin' lark.
Thanks
OGSome give pleasure where ever they go, others whenever they go!
-
22nd July 2009, 10:04 AM #13
Sketch
Helmut
Attached is the sketch we were discussing
regards
-
22nd July 2009, 09:04 PM #14Senior Member
- Join Date
- Jul 2005
- Location
- Castle Hill
- Age
- 59
- Posts
- 239
Batch 5 plane blades?
G'day Helmut,
I see that my name is down on the batch 5 plane blade PDF. Is that batch the one we are discussing here, or is it finished? If that batch is complete I must have missed something.
Just let me know if I owe you some money, don't want to be known as someone who commits and then doesn't pay.
Regards,
Anthony
-
23rd July 2009, 09:00 AM #15
Anthony - you expressed interest in some plane blades during the Stanley Batch order. If you are not interested in the blades anymore I will remove you from the list.
Similar Threads
-
Homemade Plane Blades from M2 HSS for Wooden Planes
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 351Last Post: 27th July 2009, 04:52 PM -
so i got some plane blades but need planes to put them in
By weisyboy in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 14th February 2009, 12:10 PM -
D2 Plane Blades - Batch Order 02
By thumbsucker in forum HAND TOOLS - UNPOWEREDReplies: 259Last Post: 16th November 2008, 08:34 PM -
Curved plane irons in old wooden planes
By SteveMcM in forum WOODWORK - GENERALReplies: 3Last Post: 14th August 2007, 05:09 AM -
Help - Restoring Old Wooden Hand Planes
By nix in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 23rd June 2004, 12:10 AM