Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Trying to get a handle on things
-
6th December 2012, 01:15 PM #1
Trying to get a handle on things
This one is another piece of my silliness. SHMBO broke the handle on her garden trowel. It was some sort of synthetic polythene that crumbled and broke under her tender touch.
The aluminium blade is a little more sturdy than most small garden implements and I decided to fit a new handle. Here is the result. There is a significant, but tight, gum vein down one side, which I actually rather like, and the powder post borers had been into the underside section. The handle was shaped with an angle grinder using a coarse sanding disc and a rubber backing plate.
I didn't trouble to fill the defects (it is only a garden trowel) and as usual this spotted gum (Corymbia maculata) has some gentle, I call it subtle, figure to it.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
6th December 2012 01:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th December 2012, 01:25 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
-
6th December 2012, 01:57 PM #3SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
A grinder you say ? Shouldn't this thread be in the carving forum ?
It's a bit too nice for the garden Paul. Amongst the potted strawberry runners on the patio maybe but not in the grubby rows of carrots and beans.
I like it a lot.
-
6th December 2012, 02:08 PM #4
Good job Paul, although you may have gained more satisfaction by shaping it with a nice rasp......
Hard to beat good ol' Spotty as a workhorse timber isn't it? I'm a big fan of gum lines and such myself, as long as the potential instability doesn't get in the way of things (e.g. my Spotty drill press table has significant veins but they matter not.
-
7th December 2012, 08:42 AM #5
Certainly much better than a bought one!
I'll be the dissenting voice on one aspect. I would have tried to avoid any gum veins in a handle - it is a line of weakness, after all, though I suppose it's unlikely to be a big concern in this particular case unless your better half takes to using her new trowel as a demolition tool. I just can't look on gum veins as anything but 'defects', I'm afraid, probably as a result of early indoctrination from my dad. I had to chuckle when Forestry Tasmania was touting extensively gum-veined wood as "Natural Feature Grade", or NFG, for short. "NFG" was just what I thought, it was. Someone in their ad department must've twigged, finally, 'cos I haven't seen ads for wood that's NFG, lately....
Cheers,IW
-
7th December 2012, 09:14 AM #6
Ian
You are quite right. There are a couple of comments I would add. It is only a garden trowel and it was going to be hoisted otherwise.
In timber grading there is reference to tight gum veins as opposed to loose veins and these are acceptable within certain parameters even for structural timbers. I looked at this piece and decided that it was not going to split on me particularly as it doesn't go all the way through the handle. I do like the look of it too.
It was in fact my second attempt. The first split when I forced the handle onto the oval shaped tang. I had reduced the handle wall thickness too much and it split out as it passed over the barbs on the tang. In the second attttempt I shaped the handle after it was on the trowel.
I have to agree with you on the NFG tag in that it was a way to use material that had formerly been condemned. Marketing has a way of trying to slip such deceptions into our everyday life.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
7th December 2012, 11:09 AM #7Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
-
7th December 2012, 11:15 AM #8Senior Member
- Join Date
- Feb 2012
- Location
- Adelaide
- Posts
- 451
you did this with an angle grinder! you could take up ice or wood sculpting . i havnt seen them for a while but they are probably still available, there used to be special blades (quite aggressive looking) you could fit to the angle grinder that were made to sculpt wood or ice, dangerous looking things but so are chain saws (not that i would do this job with one of them, a rasp instead for me)
the 'defect' adds some interest, if it was something special (furniture or whatever) filling the vein with a resin or something so it still looks interesting but doesn't feel uncomfortable to the touch can be useful . of course a defect is only a defect related to its intended purposes. timber is graded for various purposes , live knots ok for many jobs , dead knots not, only clear timber is suited for some work, other times the same specie can be rated better even though it has some knots, so long as the defect doesn't undermine its integrity for the intended use then it adds interest, whether you want the added distraction is a matter of personal preference
cheers
chippy
-
7th December 2012, 05:59 PM #9
Stay away from Marri then, Ian
(Marri Cascade Riverstone Coffee Table )
-
7th December 2012, 07:43 PM #10
-
7th December 2012, 07:55 PM #11
I am sure they do. In some cases it is the difference between looking ordinary and sensational.
An example of this is my son's didgeridoos which are fashioned from ironbark. They have many flaws in the timber, but in this case they add character. Sometimes he disguises them, but more often highlights the defects.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
8th December 2012, 07:08 PM #12
Both Pauls are right on the money. You won't ever see anything like that in my house (unless the minister for war, finance & interior decvoration decides there will be.. )
And I will stary away from Marri - I'm about about 4,000 Ks away as the crow flies, & not planning to get any closer right now.
Cheers,IW
Similar Threads
-
First Project, things learned, things loved.
By hoovie26 in forum WOODCARVING AND SCULPTUREReplies: 3Last Post: 13th January 2010, 11:51 AM -
a day of getting a handle on things.
By tea lady in forum WOODTURNING - GENERALReplies: 29Last Post: 26th October 2009, 08:37 AM -
From Big Things Little Things Grow
By LiliB in forum SCALE MODELLINGReplies: 6Last Post: 30th December 2008, 08:45 PM -
Getting a Handle on things.....
By Stu in Tokyo in forum WOODTURNING - GENERALReplies: 50Last Post: 7th August 2007, 11:15 PM