Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5

Thread: unusual brace

  1. #1
    Join Date
    Aug 2009
    Location
    Brisbane
    Posts
    33

    Default unusual brace

    Hi.. don't think I have showed this before.. 10 inch brace.
    threads are metric, so I am guessing European made.. no markings !
    note the slot !
    The clamp screw is not original, but if someone has one of these with the proper screw I would make a copy.
    Attached Images Attached Images

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    75
    Posts
    1,070

    Default

    I've never seen one with the wide slot like that before, looks as if its been sawn?

  4. #3
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    75
    Posts
    1,070

    Default

    Kenny, that style of brace was originally patented by Nelson Spofford in 1859 in the USA (US Pat 25984) In this patent he states "A slot, a, is cut into it, which divides said socket into two jaws, that are forced together by a thumb screw".
    A patent update in March 1880 (US Pat 22768) Spofford rejects sawing the division in favour of casting it forked because "to preserve the strength and resiliency of an article made of cast metal it is necessary to preserve the skin of the casting intact, as the thin hard covering or skin that envelops the casting has the effect of imparting increased strength to the same. Hence, when the slit is formed in the arm of the bit-brace by cutting the metal away with a milling device, the interior portions of the arms are left without the skin metal that surrounds the outer portions of the arm, and thus the slitted arms materially weakened and their resiliency lessened to a considerable degree".
    I would assume that whether the arms are sawn or cast they would then be pressed together to leave little or no gap between the two halves. This style that I've seen are those made by John Fray & Stanley in USA, Mathiesons of Glasgow, W & C Wynne of Birmingham, Henry Boker, Germany and other unknown, illegible or unbranded examples. All are pressed together with little or no gap at the apex of the join so your example is unique in my opinion.
    They are frequently found with the thumbscrew replaced due the thread stripping in the casting but yours doesn't look typical of those cases which are usually in lot rougher condition. Have you had the head off? It looks like a bearing sleeve poking out slightly or perhaps a shim sleeve to take up wear?
    Anyway Kenny thanks for posting I know a lot of people think I should get a life but you put it up on my birthday which could only enhance my day.
    Cheers,
    Geoff.
    Last edited by Boringgeoff; 8th September 2019 at 10:46 AM. Reason: tidying Spoffords words.

  5. #4
    Join Date
    Aug 2009
    Location
    Brisbane
    Posts
    33

    Default

    Geoff.
    A belated Happy Biirthday.. In regards to the pad..the sleeve is a piece of brass shim I fitted to take out a little of the wobble near it's mouth.
    I must also add that unlike the Mathiesons, the end of the handle is flat, as is the bottom of the hole. Here it steps down and continues thru the pad.
    Attached Images Attached Images

  6. #5
    Boringgeoff is offline Try not to be late, but never be early.
    Join Date
    Apr 2011
    Location
    Bakers Hill WA
    Age
    75
    Posts
    1,070

    Default

    Kenny,
    I've never seen that feature before.
    Cheers,
    Geoff.

Similar Threads

  1. Old brace
    By DavidG in forum HAND TOOLS - UNPOWERED
    Replies: 7
    Last Post: 26th September 2017, 06:09 PM
  2. Brace the Old
    By John Saxton in forum WOODIES JOKES
    Replies: 1
    Last Post: 12th April 2017, 09:07 AM
  3. Brace to id
    By IanW in forum HAND TOOLS - UNPOWERED
    Replies: 23
    Last Post: 10th October 2015, 05:00 PM
  4. Unusual hand brace
    By powderpost in forum HAND TOOLS - UNPOWERED
    Replies: 5
    Last Post: 2nd January 2009, 09:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •