Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Who Used This?
-
13th February 2014, 09:10 AM #1
Who Used This?
I've been collecting Siegley planes for some time now.
But I've never seen this before!
sb1.jpg sb2.jpg
The plane is a Siegley 2# Adjustable from around 1886.
I've always wondered what the two holes in the skate were for.
But I had no idea you could do this with them.
The closest thing I've seen to a system like this would be a Fales.
When I first saw it I thought it may be a Patternmakers plane.
But a lot of the over 80 blades have really complex profiles.
Which makes me think it's a system for making architraves!
sb3.jpg sb4.jpg
A lot of people think that the two holes in the main body skate of the 1886 Siegley
were drilled by the owners.
But they appear in all of the 1886 planes.
It was the only time Siegley made them with the holes.
Obviously to do this.
I know nothing about what I've got here other than it's just wonderful!
Does anyone out there have any information or knowledge of this type of setup?
Trevor.
-
13th February 2014 09:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th February 2014, 07:11 PM #2
I know nothing about Siegley planes, other than that they are serious handtool bling , but Stanley made a set of hollow and round attachments for the #45. These appear to be moulding attachments in a similar vein.
Are the irons actually marked Siegley? Could this be something that someone has made themselves?Those were the droids I was looking for.
https://autoblastgates.com.au
-
13th February 2014, 08:25 PM #3
The blades look to be hand made.
The plane itself many refer to as a type 5 from around 1886, possible a little earlier.
It's the only production model of the 2# Adjustable that had the two holes drilled in the skate.
So it was a very short lived thing.
It makes me think that although there is a hand made element to it.
It may well have be made in total by Siegley, as none of the blades appear to be like those made for
the regular 2#.
It's possible that there hand made because they weren't tooled up to make them.
It's a very extensive setup to say the least.
IMG_1649.jpg IMG_1650.jpg
This is just some of the over 150 parts that make it all up.
IMG_1651.jpg
There are 50 of the wooden pieces that form hollows and rounds,
and a few other shapes I have no idea of!
IMG_1647.jpg
Apart from the blades to make the hollows and rounds there are over 30 complex cutters.
Here's some of them all hand made, some almost 2 inch's wide.
IMG_1648.jpg
I've got a basic understanding of what it all is, but I'm hoping someone can nail it down for me.
IMG_1652.jpg IMG_1653.jpg
I'd love to know the history and application of all this.
Even the box it's in is Chestnut with hand cut dovetails!
Thanks for your interest.
-
14th February 2014, 03:31 PM #4
Or possibly a made to order type thing.
We'll probably never know. Really well implemented.
Sharpen a few profiles and have a go. I'd like to know how it performs.Those were the droids I was looking for.
https://autoblastgates.com.au