Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 146
-
29th April 2008, 03:10 PM #1
What are THE BEST blades available in Australia?
Hope this turns into a controversial topic, because I'm sure there are a lot of opinions out there.
What I am looking for are some new blades for my new 10" TS. Now I know there are horses for courses - types of wood, thicknesses of wood, crosscutting and ripping, so obviously everything will be a compromise to one degree or other.
I am looking for:
Material: primarily wood (pine, jarrah, walnut, kauri). I may want to cut melamine & ply, but will look at a separate blade for this.
A ripping blade - fast and smooth
A crosscut blade - superfine finish, and no tearing out of fibres (no I don't have the facility for a scoring blade)
A combination blade that can handle much of the work, but means I can resort to one of the 2 blades above when the situation requires "the best"
I'd possibly expect plenty of noise reduction slots and expansion joints, some form of coating (teflon, nickel), ATB or triple cut. (But any alternative suggestions welcome - I only know what I know)
Brands: well we will see what comes out (I'd imagine CMT and Infinity both to be there)
Hope you can help! (And yes, I've done a search and found a plethora of answers spread over lots of posts, bu haven't found one that focuses on the question....course there is every chance that I missed it!!)"Clear, Ease Springs"
www.Stu's Shed.com
-
29th April 2008 03:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2008, 03:26 PM #2
G'day Stuart,
Similar to what I just wrote in the thread Best Router Bits.
Kanefusa
http://www.kanefusa.jp/eng/products/wood/index.html
Damn good t/saw blades, pricey but they're backed by great steel and R&D.
See pages 21-45 of http://www.kanefusa.jp/eng/products/...catalogue2.pdf
Daiko, also Japanese, make great t/saw blades.At the moment I have CMTs Industrial Fine Cuttoff blade in my 10HB which is my primary blade for combination work.
-
29th April 2008, 03:33 PM #3
Thanks Waldo - should clarify - cost is not one of the criteria for selection (unless we start talking about diamond tipped diamond or something!!)
Any idea of local suppliers?"Clear, Ease Springs"
www.Stu's Shed.com
-
29th April 2008, 03:36 PM #4
I think from memory you can get Daiko blades from Peacock Saws in Brisbane. (yep you can)
http://ebm.worldhosting.org/easyweb3...ART=11&BLOCK=0
But very pricey, but
I did have a Daiko Combination Rip 300, 3.2, 40 teeth, but FIL flogged it and now I have an empty box. Fantastic blade.
-
29th April 2008, 03:38 PM #5
$70 - $130? Doesn't seem too bad if I am reading it correctly. (Or shouldn't blades typically be that much?)
"Clear, Ease Springs"
www.Stu's Shed.com
-
29th April 2008, 03:41 PM #6
Stuart,
As you know I am not a big fan of the combo blades. Some people like it but not me.
I bought 2 blades together with my supersaw 4 years ago. They were a Frued ripping blade (24 teeth) and a crosscut blade (60 teeth). So far they have done a great job for me. The crosscut blade produces a very clean cut on hardwood, MDF and ply. I am very happy with it.
I do have to change between the 2 blades all the time but I am used to it now.
I wouldn’t mind trying the CMT blades but there is no need at the moment because the Frued blades are still going strong. Hope it helps.Visit my website at www.myFineWoodWork.com
-
29th April 2008, 03:43 PM #7
Sorry forgot to tell you the price.
The crosscut blade was around $100 (OK it came with the saw so it was free)
and the ripping blade was around $45.Visit my website at www.myFineWoodWork.com
-
29th April 2008, 03:43 PM #8
-
29th April 2008, 03:46 PM #9
I am hoping to become that industrious, and being able to easily change blades finally, I hope that I will (as you do with bandsaws - the right blade for the job). With the built-in shaft lock, and (finally) having a removable insert to give good access, this is where I hope to head. (Have to break some old habits.... used to just using 1 x 60 tooth blade, and never changing it for fear of mucking up the Triton's accuracy!)
Cheers Waldo - course, they are cheaper for the 10"!"Clear, Ease Springs"
www.Stu's Shed.com
-
29th April 2008, 03:50 PM #10
-
29th April 2008, 03:52 PM #11
My two non controversial cents worth
I have 3 blades for my unisaw....And I like em all
I have the blade that came with the saw which is a Delta combo blade....I use that for rough sizing timber, as it works well either cross cut or rip.
I aslo have a CMT melamine and fine cut off (80 teeth). this does an excellent job on cross cuts and sheet goods. I got this balde thrown in from Carbatec when I bought the saw
lastly I have a Freud glue line rip blade that leaves an excellent finish on the cut and cuts quite fast. This Blade I bought from Major woodworking equipment.
All these blades are the same age (approx 2 years) and are still going strong
cheers
BD
-
29th April 2008, 04:46 PM #12
As Wongo said, blade changes on the tablesaw are a non-event, espeially on the TL10S with spindle lock.
At the risk of being seen to be pushing Northwood, I would still recommend their "home brand" blades. I originally bought 3 on the recommendation of another forumite (Spartan) to tide me over whilst I was looking for the big bucks blades.
Long story short, I never did buy those big bucks blades, these blades are excellent and you can't beat the price, $100 for 3 blades delivered.
-
29th April 2008, 05:50 PM #13.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
I have 4 blades for my 12" saw,
A 48 tooth combo blade that came with my saw. It's now blunt and I hardly ever use it. It's very noisy just spinning, and extra noisy when cutting
A $52 , 24 tooth CMT ripper from Carbatec. It's nothing special but it does the job. Moderately quite just spinning and also noisy when cutting
A $105 , 100 tooth triple chipper for very fine cross cuts on small pieces which is slow but makes the quietest cleanest cuts in wood.
But I reckon my best blade is my 96 negative raked tooth, $60, "made in china blade" Bosch , composite cutting blade (melamine, ally, plastic etc) that I bought from toolmark last year. It's built like a brick dunny, has nice meaty TC teeth and seems to eat anything I throw at it in a very clean way. If I have to buy another blade I'm definitely going to look in that range of blades.
-
29th April 2008, 06:54 PM #14
-
29th April 2008, 07:16 PM #15
G'day.
Yep. Kanafusa saws are the best by a long shot.
Available from Advanced Timber Systems (ATS) in Darra (Brisbane)
All my TCT saws used for our flooring production are Kanafusa.Hooroo.
Regards, Trevor
Grafton
Similar Threads
-
'Plain' Blades v Spiral Blades.
By hawkinob in forum SCROLLERS FORUMReplies: 1Last Post: 30th March 2008, 04:48 PM -
Around Australia
By rod@plasterbrok in forum MOTOR HOMES, CARAVANS & CAMPINGReplies: 14Last Post: 21st November 2007, 11:06 PM -
Australia Day
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 34Last Post: 28th January 2007, 12:21 PM -
Australia Day
By bennylaird in forum WOODIES JOKESReplies: 0Last Post: 24th January 2006, 07:42 AM -
Australia Anybody?
By PhatDub in forum WOODWORK - GENERALReplies: 9Last Post: 27th May 2005, 07:05 PM