Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Bosch GTS 10 XC Dado capability.
-
1st March 2014, 10:20 PM #1New Member
- Join Date
- Jun 2013
- Location
- Newcastle
- Posts
- 3
Bosch GTS 10 XC Dado capability.
I have just purchased the above saw and I cannot find any information on whether the saw is capable of using a dado set.
I have changed the ballade to a 40 tooth and during the process noticed that the arbour still has a lot of threads left after the blade is installed.
If anyone has one of these saws or knows if a dado set can be used I would appreciate the feedback.
Sent from my iPad using Tapatalk HD
-
1st March 2014 10:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th April 2014, 06:13 AM #2New Member
- Join Date
- Apr 2009
- Location
- Buenos Aires
- Posts
- 1
Hi Skoda. Found just your question.
I own a GTS10. The manual doesn´t mention the dado capability. However, the US sister version, bosch 4100, does. You can download de 4100 bosch manual from the us bosch page. or http://mdm.boschwebservices.com/files/r51487v2.pdf páge 32
All the models sold in US
http://mdm.boschwebservices.com/files/r19629v2.pdf
http://mdm.boschwebservices.com/files/r19628v2.pdf
It say maximum dado capability, 13/16, which is a hair above 20mm. As per instructions, it states that the flat outside washer should be first installed in the shaft. Then the dado blades, and after the washer which was in the inner side. I´ve been dadoing for the last 3 years.
Take care
-
23rd April 2014, 04:36 PM #3New Member
- Join Date
- Sep 2013
- Location
- Melbourne
- Posts
- 2
I own a GTS 10 XC myself and although I love that machine to pieces there have been a couple of limitations that I cant seem to get my head around including the use of a dado.
Any chance you could post a photo of your table saw with the dado installed?
Up until now the only solution to that as well as the limited range blades that will fit the arbor is to follow this guy in the link below and do a swap over of the arbor with the arbor from a 4100.
http://www.routerforums.com/tools-wo...nks-rcp16.html
Cheers,
Joe
Similar Threads
-
Dado capability?
By chook in forum TABLE SAWS & COMBINATIONSReplies: 5Last Post: 6th February 2012, 10:13 AM -
Dado blade for Bosch GTS10
By Epi17 in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 30th March 2011, 06:32 AM -
MFT 3 Table Capability?
By Hofner in forum FESTOOL FORUMReplies: 1Last Post: 20th August 2010, 12:23 AM -
To Dado or not to Dado? Spindle Moulder or Router?
By Dovetail in forum TABLE SAWS & COMBINATIONSReplies: 6Last Post: 13th October 2007, 01:53 AM