Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
31st October 2012, 04:58 PM #1Intermediate Member
- Join Date
- Mar 2010
- Location
- Canberra, ACT, Australia
- Posts
- 39
Carbatec CTJ-650 versus Jet JWTS-10
For a variety of reasons I am limited to a choice of either of the above to replace my Triton 2000. I'm looking for advice on these (or similar items) and would appreciate any help that is available.
Regards
Peter Evans
-
31st October 2012 04:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st November 2012, 01:14 AM #2well aged but not old
- Join Date
- Sep 2004
- Location
- Brisbane
- Posts
- 925
You should contact Gary Pye and have a look at the table saw he sells. It is around the same price as these and works very well.
My age is still less than my number of posts
-
1st November 2012, 11:46 PM #3
I've got the Jet and could't be happier, huge step up from the Triton.
Cheers Rumnut
-
2nd November 2012, 02:15 AM #4well aged but not old
- Join Date
- Sep 2004
- Location
- Brisbane
- Posts
- 925
I had a Triton for a long time and I cut lots of timber with it and it worked okay. But there is not comparison between a Triton and a proper table saw. And in fact if you are starting from nothing, the price of a table saw is not much more than a Triton table and a proper saw to go in it.
My age is still less than my number of posts
Similar Threads
-
Jet JWTS-10 blade problem
By oldfossil in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 8th November 2010, 11:41 AM -
Dust Extraction - JET JWTS-10 versus Proshop
By GarethR in forum DUST EXTRACTIONReplies: 1Last Post: 26th February 2009, 07:17 AM -
Manual for Jet JWTS - 10
By hardwoodjoint in forum TABLE SAWS & COMBINATIONSReplies: 5Last Post: 28th October 2007, 07:37 PM