Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
18th September 2022, 10:44 AM #1New Member
- Join Date
- Jun 2019
- Location
- Australia
- Age
- 33
- Posts
- 1
A way to make cheap table saw crank better?
Hi,
Bought a cheap ozito table saw from Bunnings a few years ago and it is now extremely tight to crank it up and down. Wondering if there is anything one can do at home to make it looser again?
Thanks.
-
18th September 2022 10:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
18th September 2022, 11:08 AM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
You may improve it by simply putting some dry lube or candle wax on the moving parts. If that doesn't help you will need to pull it apart, clean, lubricate with an appropriate materials for the particular application, and reassemble. It might take a while but it will be time well spent.
-
18th September 2022, 11:23 AM #3SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
Hi Aidan,
Welcome to the forum.
Have you opened it up and taken a look at the mechanism? My first thought is that its probably got caked on dust making the mechanism bind. If so you'll need to give it a good clean, ie wire brush and elbow grease. If it all looks fine i'd second the notion of giving everything a good lubrication with some dry lube.
Depending on usage this is something that does need to be done regularly.
-
20th September 2022, 10:51 PM #4Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 359
Ozito is what it is!
General rule is clean well all relevant parts -threads etc. and use DRY lube PTFC etc. as things like WD40 etc. help quickly and then attract dust which makes the problem come back again.
-
24th September 2022, 01:12 PM #5GOLD MEMBER
- Join Date
- May 2015
- Location
- Brisbane
- Posts
- 1,147
WD40 make a silicone spray which works well, doesn't gunk up
Similar Threads
-
Additions to cheap F-clamps to make them more useable
By justonething in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 5th August 2019, 11:28 PM -
Can I Retrofit TRC001 thru the table winder crank to TRA001?
By barrysumpter in forum TRITON / GMCReplies: 8Last Post: 20th November 2017, 04:07 PM -
old crank
By texx in forum METALWORK FORUMReplies: 3Last Post: 11th November 2013, 07:28 AM -
very cheap manual vacume pump you can make at home
By Spanner69 in forum CASTING & STABILISATIONReplies: 4Last Post: 30th May 2009, 10:40 AM -
How do they make carvings so cheap
By MeTaBo MaN in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 18th August 2005, 11:10 PM