Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Crosscut blade recommendations.
-
2nd June 2013, 07:33 PM #1
Crosscut blade recommendations.
I am currently building a crosscut sled for my jet proshop ts. I want to buy a dedicated crosscutting 10" blade to go with it. This will be for crosscutting both sheet materials and solid wood. I am after recommendations for a good quality blade that isn't too expensive.
I currently have a cmt 40 tooth 'fine cutoff' blade but it isnt actually that good for crosscutting or ripping (trying to be both).
Sent from my GT-I9305T using Tapatalk 2
-
2nd June 2013 07:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
2nd June 2013, 09:46 PM #2
Try Henry Brothers Saws, 541 Old Hawkesbury Road, Vineyard. 02 9627 5486. I've used them for years and always trust their judgement. They make and stock all types of blades for all brands of saw.
-
3rd June 2013, 03:35 PM #3
Crosscut blade recommendations.
Psych
A 40 tooth blade won't be much good for ripping. You need a blade with less teeth.
I tend to use infinity saw blades, but you can only get them from the us. See here http://http://www.infinitytools.com/...products/1195/
Otherwise, I find amazon a good place to get saw blades. Shipping is generally pretty cheap. Now that the dollar has dropped though, thinks are comparatively a little more expensive.
Good luck
TravSome days we are the flies; some days we are the windscreen
-
3rd June 2013, 03:40 PM #4
Crosscut blade recommendations.
Sorry, just had a Monday moment. For cross cut blades look here http://http://www.infinitytools.com/...products/1198/
Some days we are the flies; some days we are the windscreen
-
4th June 2013, 10:33 PM #5
Just bought a new 10" blade from Henry Bros., made in Germany, about $80. Goes through 50mm NG Rosewood like a hot knife through warm butter!
Similar Threads
-
Adelaide - Jointer Blade Sharpening Recommendations
By Sir Stinkalot in forum SHARPENINGReplies: 5Last Post: 12th February 2014, 06:27 PM -
WA Recommendations for thicknesser blade sharpening
By BobL in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 7th May 2013, 10:59 PM -
Bandsaw Blade recommendations
By redgum in forum WOODTURNING - GENERALReplies: 27Last Post: 22nd October 2009, 01:53 PM -
Is ripping with a crosscut blade possible?
By SteveMcM in forum TABLE SAWS & COMBINATIONSReplies: 8Last Post: 10th April 2008, 09:36 AM -
Blade/Blade supplier recommendations
By Androo in forum SCROLLERS FORUMReplies: 9Last Post: 23rd July 2006, 12:10 PM