Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 53
Thread: Daddo blade trash talk
-
19th May 2007, 05:44 PM #16Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Hmm, 'daddo trash' I thought was a comment on a celebrity.
Cheers, Ern
-
19th May 2007 05:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th May 2007, 06:12 PM #17
I must be weird!
After basic cutting to size I would use the dado for about 25% of all work on the table saw. I am also planning on cutting my tenons with a split dado once I buy an 8" set (Sydney WWW, here I come!). After general quality, ability to take a dado was number 1 priority in choosing my table saw. I for one simply wouldn'y buy a TS if it didnt accept a dado.
I like the ability to cut non standard widths as ply, with and without veneer, is pretty random in thickness and, in my workshop, the dado raises much less dust than my router table.
fletty
-
19th May 2007, 06:31 PM #18
I dont use a dado blade mainly because I havent got one, if I had one I think I would use it quite a bit.
Reality is no background music.
Cheers John
-
19th May 2007, 07:06 PM #19Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Ive got a dado set and use it where possible, before that I used the Triton in the cross cut mode with the router, I prefer the dado over the Triton cross cut.
I cut the rebate for loose splines with my dado set for table tops something the Triton or RAS cant do
Once used, you wonder how you did with out it.
Al
-
19th May 2007, 09:34 PM #20
Safety
Mike
"Working to a rigidly defined method of doubt and uncertainty"
-
19th May 2007, 10:03 PM #21
Oh dear!
Could someone please enlighten me as to these incredible dangers??
I've made hundreds and hundreds of cuts, and haven't had a hint of anything that can put me in peril, what am I missing?
Cheers,
P
-
19th May 2007, 10:07 PM #22
I've always wondered about this alleged danger myself. The only thing I can think of is there is a greater mass of metal spinning which might defeat braking systems which are a CE requirement, I understand.
Other than that, the blades are always embedded in the material with no exposed meat eating extensions.
-
19th May 2007, 11:26 PM #23Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
19th May 2007, 11:28 PM #24
-
19th May 2007, 11:37 PM #25
Apparently dado blades are not illegal in Europe its just the amature woodworkers who dont looks these things up, they must have pinned holes so as not to spin on the arbor when the motor brake activates.
The blade must spin down in 10 seconds or so(?)to a complete stop, my saw(tsc10hb)only takes 5 seconds and there's no motor brake... I find the dado set takes 1 second longer to spin down than a normal blade.(yes I've timed it)....................................................................
-
19th May 2007, 11:49 PM #26
My superdoopersaw doesn’t take dado blades but I’ve learnt how to live without it. It would be nice to be able to use them though.
I also don’t understand why they are so dangerous. The cut may be wider but you only cut 2 to 3mm at a time. It shouldn't be that scary I would think.Visit my website at www.myFineWoodWork.com
-
19th May 2007, 11:59 PM #27
And the blade is covered. Little chance of kickback.
Safe in my book. At least as safe as anything involving sharp things moving fast.Photo Gallery
-
20th May 2007, 12:01 AM #28.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
Thats because they arnt
Take two machines with big spinning blades. A daddo in a saw and a shaper. I know wich one is the most dangerous and not to much is made of that .
You can even get a portable eletric hand saw fitted with a daddo blade. Never tried it but it looks interesting.
-
20th May 2007, 02:36 AM #29GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
While we are talking about cutting trenches etc on the TS - what about those shaper-arbour things that are advertised in every issue of FWW? They take cutters like a shaper - I think Delta make one and there are half-a-dozen on the US market, there was a general review in one of the better US mags in the last few years.
I haven't seen any offered by Oz dealers, nor any on the bigger on-line stores. Any comments Gents?
-
20th May 2007, 01:44 PM #30
I agree with Fletty, have just bought a JET JPS-10 and the dado WAS a consideration in my purchase because I wanted this capacity and because I though it was preferrable over routing for MY set-up.
Each to their own I guess
Gotta say I love JET and the fence is great.____________________________________________
BrettC
Similar Threads
-
How to Use a Japanese Plane 1: How to Set the Blade
By soatoz in forum JAPANESE HAND TOOLSReplies: 28Last Post: 9th April 2013, 07:50 PM -
How to Sharpen a Plane Blade Part 3: How to sharpen the front side freehanded.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 16th May 2009, 08:46 AM -
Lie-Nielsen 271 Small Router Plane – A Review
By Mirboo in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 10th January 2007, 02:45 AM -
Triton Workcentre Blade Alignment Tips / Tricks
By dohboy in forum TRITON / GMCReplies: 7Last Post: 28th September 2006, 10:06 PM -
Lie-Nielsen and the National debt.
By monoman in forum HAND TOOLS - UNPOWEREDReplies: 55Last Post: 31st August 2005, 07:43 PM