Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
30th October 2023, 11:50 AM #1Senior Member
- Join Date
- Jun 2018
- Location
- Brisbane
- Posts
- 284
Destruction Testing of contractor saws
Just in case anyone was wondering, do not drop your table saw in a somersaulting motion off a ramp from a trailer... The cast iron mount for the motor is quite likely to crack, writing the whole thing off...
Bugger!
-
30th October 2023 11:50 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th October 2023, 01:52 PM #2SENIOR MEMBER
- Join Date
- Apr 2015
- Location
- Brisbane
- Posts
- 306
Bugger. Have you tried to get it brazed or welded. Apparently brazing works well on cast iron according to Keith Rucker on YouTube. He has interesting videos on restoring vintage machinery.
-
30th October 2023, 04:51 PM #3Senior Member
- Join Date
- Jun 2018
- Location
- Brisbane
- Posts
- 284
Thanks for the comment Pete. I haven't, a) because I'm still cursing and unloading the rest of my life (oh, how I hate moving house...), but also because b) it's so much the very heart of the mounting system that I'm not going to risk it 're-breaking' under load... And c) The saw's a generic Hafco ('SB-12') Taiwanese thing, and they. do show the mount as a part in the manual - I'll see if they can source one.
I suspect competent welding would start to cost a significant amount compared to the value of the machine, and I've been looking to upgrade - just not as a result of being forced to! Luckily the Jet planer/thicknesser and the wide belt sander and bandsaw all survived fine, courtesy of the 1 tonne hoist in the shed. But (of course), it's now hidden behind a lifetime's crap, and I thought that this could be rolled down safely... Ah well, no injury other than to my sense of ingenuity, so I can live with it...
Similar Threads
-
Tenon testing to destruction
By pmcgee in forum WOODWORK - GENERALReplies: 4Last Post: 7th January 2015, 11:41 PM -
The Road to Destruction
By Carry Pine in forum WOODIES JOKESReplies: 0Last Post: 18th December 2013, 08:31 PM -
running steppers at destruction volts and amps
By SawDustSniffer in forum CNC MachinesReplies: 8Last Post: 14th February 2011, 02:31 AM