Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Dyco Saw & Buzzer combo
-
15th May 2022, 07:47 AM #1New Member
- Join Date
- May 2022
- Location
- Wellington
- Posts
- 1
Dyco Saw & Buzzer combo
Hey all,
In need of some help!
Was pleased to see there might be some knowledgeable Dyco users here
I've inherited a solid small dyco table saw & buzzer. I've been restoring it to its former glory but the saw blade is measuring a good mm off on one side of the blade to the runners so wont cut a true 90 off the fence.
I can't seem to figure out how to realign the saw blade / table. Does anyone know where to start?
-
15th May 2022 07:47 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th May 2022, 05:03 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
I do not know the saw, do you mean by runners the mitre slots in the table, if so you will need to loosen the table mounting bolts and adjust the table to the saw blade if you mean the rip fence then likewise you will need to adjust the fence to the saw. on some saws the arbor bolts mounting ( if it has them) the saw blade can be used in the same fashion.
Similar Threads
-
Dyco Combo Saw Bench
By peteH in forum TABLE SAWS & COMBINATIONSReplies: 18Last Post: 26th April 2024, 11:13 AM -
NEW COMBO! 80 - 320 grit Norton A275 Dry Rub Sheet Combo
By TheSandpaperMan in forum THE SANDPAPER MANReplies: 0Last Post: 4th April 2022, 09:46 AM -
NEW COMBO - 115 mm wide 80-600 grit Hook & Loop Roll Combo
By TheSandpaperMan in forum THE SANDPAPER MANReplies: 0Last Post: 8th October 2021, 08:33 AM -
WANTED:WA Wanted: Buzzer/Thicknesser combo and 12 to 14" Bandsaw
By matty87 in forum WANTED & WANTED TO BUY - in AustraliaReplies: 2Last Post: 16th July 2020, 10:48 AM -
jet combo buzzer/thicky smelly
By Kuffy in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 3rd June 2016, 05:29 PM