Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2022
    Location
    Wellington
    Posts
    1

    Question Dyco Saw & Buzzer combo

    Hey all,

    In need of some help!

    Was pleased to see there might be some knowledgeable Dyco users here

    I've inherited a solid small dyco table saw & buzzer. I've been restoring it to its former glory but the saw blade is measuring a good mm off on one side of the blade to the runners so wont cut a true 90 off the fence.

    I can't seem to figure out how to realign the saw blade / table. Does anyone know where to start?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,191

    Default

    I do not know the saw, do you mean by runners the mitre slots in the table, if so you will need to loosen the table mounting bolts and adjust the table to the saw blade if you mean the rip fence then likewise you will need to adjust the fence to the saw. on some saws the arbor bolts mounting ( if it has them) the saw blade can be used in the same fashion.

Similar Threads

  1. Dyco Combo Saw Bench
    By peteH in forum TABLE SAWS & COMBINATIONS
    Replies: 6
    Last Post: 18th April 2022, 08:32 PM
  2. NEW COMBO! 80 - 320 grit Norton A275 Dry Rub Sheet Combo
    By TheSandpaperMan in forum THE SANDPAPER MAN
    Replies: 0
    Last Post: 4th April 2022, 09:46 AM
  3. NEW COMBO - 115 mm wide 80-600 grit Hook & Loop Roll Combo
    By TheSandpaperMan in forum THE SANDPAPER MAN
    Replies: 0
    Last Post: 8th October 2021, 08:33 AM
  4. WANTED:WA Wanted: Buzzer/Thicknesser combo and 12 to 14" Bandsaw
    By matty87 in forum WANTED & WANTED TO BUY - in Australia
    Replies: 2
    Last Post: 16th July 2020, 10:48 AM
  5. jet combo buzzer/thicky smelly
    By Kuffy in forum GENERAL & SMALL MACHINERY
    Replies: 4
    Last Post: 3rd June 2016, 05:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •