Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Extension table does not align
-
2nd August 2009, 09:00 AM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Extension table does not align
On my new TSC-10HB, the right hand extension table does not align with the main table. I can get it dead level at the front and in the middle, but at the rear it drops down by 0.3mm below the main table.
Is it worth worrying about?
If not, can anyone recommend a suitable course of action? eg should I try and clamp both the main and extension at that end on an attempt to force them level?
regards,
Jill
-
2nd August 2009 09:00 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd August 2009, 04:25 PM #2SENIOR MEMBER
- Join Date
- May 2009
- Location
- Perth
- Posts
- 708
Hi Jill,
My RH wing has similar issues - I haven't measured the difference though. I ended up doing an 'average' alignment across the 3 fixing points. The difference is pretty imperceptible to the naked eye and timber still slides unimpeded over the surface.
These cast wings do not really have any give in them, which is a blessing for a rock solid work bed, but a pain for alignment when things are not perfect. I doubt that it could be easily forced into line.
If the thing really bugs you, you could take the extension table to a metal working machinist who would fine grind the part on their specialized equipment to get the whole surface area dead flat. Such an operation is not a big deal for those guys.
-
2nd August 2009, 04:59 PM #3GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
thanks for this TP1. It is not really bothering me, as I keep the timber pressed down on tne main table as I feed it, not the extension table. Interesting to note that machinists can easily fix the extension, but then you need to know what is the part that is not level, the main table or the extension. Probably end up taking the lot in if I was really keen.
regards,
Jill
Similar Threads
-
Saw Table/Extension Table compatability
By tomartyr in forum TRITON / GMCReplies: 4Last Post: 28th March 2008, 06:12 PM -
Router Table in Extension With of Table Saw
By bfrink in forum WOODWORK - GENERALReplies: 2Last Post: 11th August 2005, 11:34 PM -
Extension Table
By john_di_martino in forum TRITON / GMCReplies: 3Last Post: 2nd May 2003, 10:34 AM -
Where to buy extension table?
By Eowyn in forum TRITON / GMCReplies: 6Last Post: 15th November 2002, 02:11 PM