Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: hammer c3 31 vs Incra v27
-
23rd November 2012, 11:25 PM #1New Member
- Join Date
- Oct 2012
- Location
- bunbury
- Posts
- 3
hammer c3 31 vs Incra v27
Hi there guys and girls, I'm new to the forum and thought i would say hello. ! have just taken ownership of a hammer c3 31 combination saw and have spent the last few spare hours clean surface rust and lubing up all necessary components. before picking it up, i purchased the rolling carriage from richard at KR Engineering in Malaga. fitted it on and am very happy with the mobility. I spent the last part of the afternoon checking the squareness of the crosscut, and after a few adjustments, i think i have it bang on.
Dust extraction is being taken cake of by a 2hp Carba Tech single bag jobby.
yesterday I purchased a secondhand dovetail jig and the guy also had an Incra V27 miter gauge. i picked up the gauge for a few extra bucks and thought that it would be a good addition to my setup. Now today when i went and tried to mount it, i realized that it doesn't appear to fit the groove on the sliding table.
my question is this.... is anyone out there using this miter gauge with a hammer product, and if so, is there anyway i can make this work for me... if i cant get it to work for me, i may just have a miter gauge for sale... any ideas on similar system for use with hammer products would be greatly appreciated.
regards,
squid
-
23rd November 2012 11:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th November 2012, 12:16 PM #2
Hi Squidrun, I am wondering which model c3-31 you bought. Doesn't it have a sliding table??
Darren Jensen
www.timberworks.weebly.com
-
24th November 2012, 04:39 PM #3
Welcome to the wacky world of Hammer.......and non-standard mitre slots. Why they persist with this is beyond me. A friend had exactly the same issues as you (except he bought a standard mitre gauge AND an expensive tenoning rig as well, neither of which be used with this machine)
If it has a sliding table (as most C3-31 do), why do you want a mitre gauge?
Congrats on your nice new machine by the way - they are a very nice bit of kit
-
24th November 2012, 11:16 PM #4
Generally, European machines do not have the standard 3/4" mitre slot to take mitre gauges and tenon jigs. As the hammer had a sliding table, the mitre gauge should not be required. Tenon jigs, now that is another matter . Maybe they sell their own tenon jig for the machine.
Les
-
25th November 2012, 05:07 PM #5GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,721
An option could be do get your mitre slots professionally milled out by an engineering firm to accommodate standard after market mitre guides such as the Incra. My table saw had this done by the previous owner without any problems.
Andy
-
26th November 2012, 03:58 PM #6New Member
- Join Date
- Oct 2012
- Location
- bunbury
- Posts
- 3
hey guys, thanks for your replies....
it is a standard hammer c3 31, and yes it does have a sliding table.
the reason behind wanting to mount the Incra Mitre Gauge was to be able to make easily repeatable angled cuts with a gauge that actually locks into position.
the setup for angled cuts on these machines,with no postive locking angle stops, leaves a bit to be desired, in my opinion. . to cut a known angle, your crosscut fence can only be used in one position because the scale determining the angle is mounted on the sliding table... just a few observations from a new user..
i guess what i should have said in earlier post is that i was expecting the glideLOCK bar with expansion points would hold the gauge in position on the sliding table...
Not to worry though, it only cost me $30 and i am sure i can find a use for it elsewhere....
everything else on the machine i am extremely happy with, thickneser/buzzer is great, and i love having a spindle to play around with... it also came with a makita 3600b plunge router and the dust extractor.
have just been running it in, or should i say running myself in on it.. takes some getting used to working things in order so as that having to reset for a new task is a constant affair..
i should also say that along with this gear, i was also given a scroll saw, so that has been quite a fun little exercise... will post photos later for anyone interested in seeing what im working on..have been running up some sandalwood on the thicknesser, now my garage smells amazing!!!
well im off to work on some picture frames, once again thankyou for your replies
Squid
Similar Threads
-
Incra Jig
By sbolton in forum ROUTER JIGSReplies: 8Last Post: 26th October 2007, 01:05 AM -
Impact Hammer vs Rotary Hammer Drill
By Burnsy in forum HAND TOOLS - POWEREDReplies: 10Last Post: 17th October 2007, 12:22 AM -
incra jig
By jd&coke in forum ROUTER JIGSReplies: 7Last Post: 19th September 2006, 04:17 PM -
Incra Jig
By A192K in forum INCRA JIGSReplies: 19Last Post: 7th March 2006, 04:10 AM -
Incra
By johna in forum WOODWORK - GENERALReplies: 35Last Post: 19th November 2004, 01:53 AM