Thanks: 0
Likes: 0
Picture(s) thanks: 0
Results 16 to 24 of 24
Thread: Harvey brand tablesaws
-
2nd October 2013, 03:44 PM #16SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
Llya
I have ordered myself a harvey http://www.majorwoodworking.com.au/w...b-30-tablesaw/ due to the run around and extremely poor service and response I was getting from gregmach.com.au (this is an entire new topic/thread regarding this)
Hopefully I should have my saw tomorrow and give me a day to set it up (being the first real table saw I have owned) and then I will give every one a run down review of it in the next week or so.
Check out my site at www.upcycled.net.au
-
2nd October 2013 03:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th October 2013, 11:56 AM #17Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 420
Grant, did you get the Harvey saw? I was told by MajorWoodworking that the Laguna is made on the same factory as Harvey, so the quality is expected to be comparable???
-
10th October 2013, 11:58 AM #18SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
Got my saw and have only had a quick play with it. I am in bathurst at the moment for the racers but will give the saw a play with on my return.
I was also told laguna was a harvey base.
Sent from my GT-N7105 using Tapatalk 4
-
14th October 2013, 09:02 PM #19SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
Got home from Bathurst this afternoon and have to get back in the car and head to Broken Hill in the morning so can't give the saw a good testing until at least late this week.
I can say the small play I have had with it when I first got it has impressed me. In some ways I wish I had bought the next model up but due to not having 15amp I had to settle for the lower model (renting and move frequently)
The table top is flat with the wings (attached by myself alone) are also flat (took me a big longer as I was alone)
The blade was straight out of the box and did not need to be aligned.
The 90 mark was spot on and the 45 was a tad over at 44.2 but was extremely easy to fix and make it stop at 45.
The fence was also straight out of the box and locks in great.
Did a small amount of ripping and cross cutting of both hard and soft wood under 20mm thick and it handled it great.
Chucked my new Freud dado blade on and tested out my also new Incra Ibox and made some boxes out of the hard and soft wood with the blade at full width and it cut the dado very easy.
I am very happy and can only recommend them to people.
I will try and do a real review on it wehn I return and have a better play with it.
-
14th October 2013, 09:33 PM #20Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 420
-
14th October 2013, 09:41 PM #21SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
The base model is this good I could only imagine how much better the next model up would be.
-
14th October 2013, 09:46 PM #22Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 420
Yep, I see your point. The question is what would be real advantages apart from power...
-
14th October 2013, 10:26 PM #23SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
The trunnions mounted on the cabinet and is triple belt driven.
-
19th October 2013, 10:20 AM #24SENIOR MEMBER
- Join Date
- Dec 2012
- Location
- NSW
- Posts
- 133
But the trunnions is really only a minor issue if none at all as the blade was perfect out of the box.
Similar Threads
-
HEADS UP Harvey Auction
By pmcgee in forum ANNOUNCEMENTSReplies: 0Last Post: 9th March 2012, 05:47 AM -
Harvey log auctions this Saturday
By fpcwa in forum ANNOUNCEMENTSReplies: 8Last Post: 8th March 2010, 07:42 PM -
Harvey Norman furniture
By liviod in forum WOODWORK - GENERALReplies: 7Last Post: 24th July 2009, 02:04 PM -
Harvey Bay whale watching
By whitewood in forum TRAVELReplies: 0Last Post: 25th July 2008, 04:38 PM -
Harvey Norman
By Ivor in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 7th October 2003, 08:07 PM