Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2019
    Location
    wantirna victoria
    Posts
    3

    Default Help with removing Dewalt DWE7491-xe 10 inch saw blade

    Hi to all. I purchased a Dewalt DWE7491-xe contractor table saw some months ago and i have found that the blade has a bit of a wobble in it, it's probably only half a mm but its enough to mark the timber that's put through it. Anyway the issue is i want to replace the blade but after removing the nut and washer i find i can't remove the blade due to the teeth hitting on part of the dust guard, I can get it to almost 5mm from the end but no further, it doesn't want to come straight out it needs to be angled in order to remove it due to the blade teeth catching on this dust guard. It looks like the blade was put on first and then the dust guard after.
    Has anyone had similar issues and how did you finally remove it.
    Thanks in advance for any help.
    Regards
    Pyrod

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    Sounds pretty simple take the guard off first

  4. #3
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,770

    Default

    Have you got the blade all the way up?

    https://www.manualslib.com/manual/87...?page=7#manual
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  5. #4
    Join Date
    Apr 2019
    Location
    wantirna victoria
    Posts
    3

    Default

    Thanks NCArcher. Stupid me i didn't have the blade all the way up, I need to go see the optometrist and get these glasses replaced.
    Old age makes you stupid sometimes!.
    Regards
    Pyrod

  6. #5
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,770

    Default

    Those were the droids I was looking for.
    https://autoblastgates.com.au

Similar Threads

  1. Dewalt DWE7491-XE - Crank will turn freely upwards but blade will not rise
    By barrysumpter in forum TABLE SAWS & COMBINATIONS
    Replies: 23
    Last Post: 16th April 2019, 08:43 AM
  2. Replies: 11
    Last Post: 31st October 2018, 11:42 PM
  3. 10 inch blade in a 9 1/4 inch power saw ... The WIP
    By toddles in forum TRITON / GMC
    Replies: 4
    Last Post: 28th July 2007, 02:57 AM
  4. 10 inch blade in a 9 1/4 inch power saw?
    By toddles in forum TRITON / GMC
    Replies: 44
    Last Post: 2nd April 2007, 08:46 PM
  5. DeWalt 12 inch thicknesser. Dust collection.
    By Robert WA in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 0
    Last Post: 14th April 2003, 08:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •