Needs Pictures: 0
Picture(s) thanks: 0
Results 46 to 49 of 49
-
21st September 2015, 09:19 PM #46SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Warragul
- Age
- 69
- Posts
- 578
-
21st September 2015 09:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st September 2015, 09:36 PM #47Chainsaw carpenter
- Join Date
- Jul 2015
- Location
- Canberra ACT
- Posts
- 111
Recently acquired a Laguna Dovetail Cabinet Saw, and went through the pick up and deliver exercise. Fortunately my next door neighbour has a tailgate lift on his landcruiser. Moving it out of the shed where I picked it up from and into my shed was achieved using a couple of motorbike fork tubes and some blocking in the pallet sides (it was on the original plywood pallet), took two guys to tip it far enough to get the tube under it, and then fed the second tube in as it was rolled across the floor. In hindsight high pressure PVC waterpipe would have done the job, but I had the tubes laying around (and they were slightly bent). Using rollers meant that there was no gut busting involved. You could also use 38mm dowels if you don't have metal tubing or access to thick walled pvc pipe. For the record, the packing was stamped as being 265kg in weight (without side tables, fence, cover etcetera).
-
21st September 2015, 10:01 PM #48
-
21st September 2015, 10:35 PM #49Chainsaw carpenter
- Join Date
- Jul 2015
- Location
- Canberra ACT
- Posts
- 111
I can attest that the 3hp Laguna will run quite happily in a standard circuit, I swapped an end on an extension lead to be able to play while waiting on the sparky. The 16A circuit breaker doesn't throw out with the saw and the 2hp dust collector running on the same circuit, I just don't swicth them on simultaneously
Similar Threads
-
NEW Laguna Fusion 10" Table Saw 36"
By Billyboydes in forum PRODUCT REVIEWSReplies: 52Last Post: 14th April 2015, 09:43 PM -
Laguna Fusion 10" Saw - anyone in Sydney have one?
By graemet in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 5th July 2013, 08:40 AM -
Laguna Fusion
By Steven hay in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 13th March 2013, 02:16 PM -
Laguna Fusion
By chemfish in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 13th March 2013, 02:15 PM -
Laguna Fusion 10" Table Saw
By Billyboydes in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 13th March 2013, 02:11 PM