Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Lazzari Juno 3000i not starting
-
2nd May 2020, 07:14 PM #1New Member
- Join Date
- Aug 2004
- Location
- Carmel
- Posts
- 4
Lazzari Juno 3000i not starting
Hi
I picked up the above table saw at an auction a while back. I have finally created some room to use it but although the small wheel works OK the large wheel just doesn't want to know. It might just be the new switch but I know that some pieces of machinery have a particular way of firing up. The switch on the far left doesn't seem to move much/ at all. Could this be the problem? Anyone know what this switch is for?
-
2nd May 2020 07:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd May 2020, 07:40 PM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
"the large wheel" and "the switch on the far left" don't really help us without a picture of said wheel and switch...
-
3rd May 2020, 08:33 PM #3New Member
- Join Date
- Aug 2004
- Location
- Carmel
- Posts
- 4
Hi. It has started working. I think I held the switch, it only moved about 5 mins on a clock face and wanted to spring back. I have a band saw that has the same, maybe, safety switch. Anyway I held it and the main blade started working. All good. This might help someone else one day as it's not intuitive.
Similar Threads
-
lazzari panel saw
By checkerflight in forum WOODWORK - GENERALReplies: 3Last Post: 2nd April 2023, 03:51 AM -
WANTED:QLD. Lazzari junior panel saw
By checkerflight in forum WANTED & WANTED TO BUY - in AustraliaReplies: 0Last Post: 1st July 2018, 06:03 PM -
manual wanted for lazzari 3000i panel saw
By checkerflight in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 13th June 2012, 08:46 PM -
manual for lazzari 3000i
By checkerflight in forum WOODWORK - GENERALReplies: 0Last Post: 3rd June 2012, 04:33 PM -
Starting Out...
By HappyHammer in forum WOODCARVING AND SCULPTUREReplies: 17Last Post: 9th June 2007, 05:46 PM