Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
2nd October 2012, 08:36 PM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Micro adjuster for tablesaw fence
Hi guys/girls. I want a micro-adjuster for my tablesaw fence. Something like this Table Saw Magnet Micro Adjuster™ - Rockler Woodworking Tools . The problem is that that one wont work because the front face of my front rail is aluminium - so not magnetic. Therefore, I'll probably need to make my own. I'm curious as to whether anyone else has made one - and if so could you share how you made it. I could design one myself, but want to hear other people's ideas first as they are usually better then mine.
cheers
ArronApologies for unnoticed autocomplete errors.
-
2nd October 2012 08:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th October 2012, 10:29 AM #2GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
OK, so lacking any other input I went ahead and made one anyway. I make a lot of jigs and fixtures - some work some dont - but in terms of how it has transformed a work practice this has to be one of the best. If, like me, you have a need for a lot of accuracy out of a tablesaw then you really should make yourself one of these. Its amazing the degree of accuracy you can get out of even a moderately priced tablesaw with this.
The way it works is that the base is fixed to the rail using the two horizontal bolts, which press against a non-slip wooden baffle inside, which presses against the rail. Locked firmly in place and far enough out of the way to not impede macro-adjustments of the fence, the top plate is then slid up till the adjuster contacts the fence. As you 'sneak up' on a cut, you unlock the fence, turn the red handle - one 1/4 turn per half mm - then lock the fence while making sure it is firmly seated against the adjuster.
Previously I would have done this with slight taps on the fence while watching the scale, a horrible error prone method in comparison.
I'll convert the bolts to something a bit more hand-friendly later.
microadjuster.jpg
cheers
ArronApologies for unnoticed autocomplete errors.
-
14th October 2012, 06:50 PM #3Senior Member
- Join Date
- Oct 2011
- Location
- Frankston, Melbourne
- Age
- 66
- Posts
- 195
nice one! Looks like a neat little jig for me to make
Cheers
Mike
Similar Threads
-
Triton after market micro adjust fence. Do these exist?
By Girius in forum ROUTING FORUMReplies: 3Last Post: 21st September 2012, 12:09 PM -
ideas for a micro ajust for tsaw fence
By Nature in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 20th February 2007, 12:08 AM -
Table Saw fence - after market micro adjuster
By burn in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 30th May 2006, 11:51 PM -
Micro Adjuster on RTA300 Router Table
By Gazza in forum TRITON / GMCReplies: 6Last Post: 28th June 2005, 02:34 PM -
Jet Micro Glide Fence
By peter in forum HAND TOOLS - POWEREDReplies: 5Last Post: 23rd March 2005, 01:48 PM