Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 21 of 21
Thread: MLT100 Any Good?
-
19th April 2012, 10:22 AM #16Novice
- Join Date
- Oct 2010
- Location
- Sydney
- Posts
- 11
The main criticism I had of this machine is that when doing small rips there is flex in the plastic plate that sits around the blade, the depth of your cut will change with the pressure you use on it, which is annoying if you want to rip down the line of a rebate to get a nice cut.
-
19th April 2012 10:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th April 2012, 11:43 AM #17New Member
- Join Date
- May 2011
- Location
- Skipton
- Posts
- 8
G'day Rcam,
yep, that plate is a bit of a let down and I must admit that the Ryobi throat-plate is steel, but held down by "easy-strip" screws.
Not too difficult though to replace, or, stiffen the original though. See that one will need to be careful with those little screws, just like the Ryobi, if they are going to last more than a couple of dozen removals.
Bit silly that Makita have two levels to hold that plate up instead of being even all the way round - probably to test out us modders Wonder why is it split at the far end ?
cheers
Bob
-
19th April 2012, 05:57 PM #18Novice
- Join Date
- Oct 2010
- Location
- Sydney
- Posts
- 11
I was thinking of picking up a bit of sheet metal and hack at it with my grinder,
really don't use it enough to warrant it though.
to be honest I've only used it a handfull of times in the last 12 months, typical chippie buying tools as a collector
-
19th April 2012, 11:24 PM #19Senior Member
- Join Date
- Apr 2011
- Location
- Pakenham, Victoria
- Age
- 53
- Posts
- 350
Ok I'm going to go ahead and upset everyone. I have owned my MLT100 for 13 months and am yet to make my first cut! I have not even plugged it in. Shocking I know. How can this be you ask? What sort of man gets a tablesaw and doesn't use it? Well me, I do.
I asked for this for my 40th birthday from the good lady wife who kindly agreed. I was a proud man indeed wheeling this baby out of Bunnings, whilst other blokes looked on jealously. I took it home and it sat in the box until last December. In fact it sat in the box in my rumpus room. This is because my shed building was delayed and I thought too much of my new saw to put it in my old leaky shed.
Now you see I don't really need a table saw, I just wanted one. I get by quite nicely with my SCMS and my circular saw and these were all I needed as I spent most of the back end of last year renovating the kitchen. The new shed went up in December but since then life has been a tad busy preparing my house and shed for sale, so shed time has been almost non existent. Sometimes I'm lucky enough to stop for a few seconds and gaze at my shed.
I have however managed to unbox it and put it together. I have also read some great threads on this forum about modifying the thing and building benches to hold it. But alas it still just sits there and looks good. Don't get me wrong, if I never make a cut on this saw, just seeing it when I walk in my shed makes owning it worthwhile.
Anyway I'm sure I've disgusted you all with my poor behaviour and will endeavor to make some sawdust with it very soon.
Danny
-
23rd May 2012, 12:42 PM #20
I have one, haven't used it too much but the few things I have it seems like a great for value item.
I have made a few mods to mine (link below) I say get one and extend the length of the bench and make yourself a new fence
https://www.woodworkforums.com/f11/nearly-finished-my-new-rip-fence-clone-152858/
-
23rd May 2012, 02:42 PM #21New Member
- Join Date
- May 2011
- Location
- Skipton
- Posts
- 8
G'day,
crikey Garfield, you must have a power of panels to destroy. Looks good but I couldn't afford the space, the MLT100 is on the big side for the room that I have now, so much so that mine is on a table with a pair of wheels cantilevered out from one end and a handle on the other so that I can easily "wheelbarrow" it around.
On the odd occasion that I have a panel to destroy I do them on horses in the backyard with the lightweight 8" running down a straight edge, extremely accurate and easy to do on your own.
The MLT100 has had a bit of use now and I must say that I am still impressed
cheers,
Bob
Similar Threads
-
How Good is it
By Stewy in forum FESTOOL FORUMReplies: 13Last Post: 8th December 2008, 01:48 PM -
The Good Oil
By Metung in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 6th November 2007, 06:28 PM -
Good design, good form. The value of planning
By TimberNut in forum WOODTURNING - GENERALReplies: 15Last Post: 6th June 2007, 02:43 PM -
Vac clamps - good or not so good?
By outback in forum WOODWORK - GENERALReplies: 1Last Post: 6th June 2004, 02:09 PM -
Im looking for a good used lathe that comes with everything that is a good price???
By Brandon in forum WOODTURNING - GENERALReplies: 12Last Post: 8th May 2003, 09:41 AM