Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Osborne Mitre Gauge
-
30th January 2008, 04:53 PM #1Novice
- Join Date
- Nov 2007
- Location
- Melbourne, Victoria
- Posts
- 22
Osborne Mitre Gauge
I've recently bought a new Osborne EB3 Mitre Gauge for my TSC-10HB saw and a few weeks down the track it seems like a ripper of a tool.
It came from the US about a week after ordering directly via an exchange of emails with Dave Osborne - who was very helpful. I just emailed for purchasing info from their website http://www.shop.osbornemfg.com/main.sc
The gauge was 100% accurate out of the box as far as I can measure it, and is a great design. Changing angles is easy & test mitres and square cuts are super easy and the handle keeps your hand away from the blade. I've used the extension of the crossbar a couple of times to crosscut longer boards and it really works well as does the flip-up stop. The fit of the bar in the table slot is micro adjustable by using an allen key on the three grub screws that widen bar slightly if necessary. Setup and checking took about 30 min. The bar also has a low friction tape on the bottom side that's easy to apply and seems to work well.
While a significant factor in the choice was price ($186 direct from the US compared to the Kreg from Carbatec at $299) the build quality and accuracy of the Osborne seems great. Good enough for Norm, good enough for me!
-
30th January 2008 04:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th January 2008, 05:45 PM #2
That looks like an interesting mitre gauge.
Hadn't come across one of those before.
-
30th January 2008, 08:15 PM #3
MRG, whats the max length of cut that can be made using the extension and stop?
Looks like a nice bit of kit!
Cheers!
-
30th January 2008, 09:14 PM #4Awaiting Email Confirmation
- Join Date
- Jan 2007
- Location
- Goulburn NSW
- Age
- 89
- Posts
- 913
looks very good how easy is to change the cut from say 90* to 45*. is the bar steel
I bought a Krieg and the sliding bar is aluminum and it tries to bend when it isn't all the way in the slot, also the brass pin that positions the angle falls out when the jig is put away. not happy
les
-
31st January 2008, 09:30 AM #5Novice
- Join Date
- Nov 2007
- Location
- Melbourne, Victoria
- Posts
- 22
The guide bar is steel with a removable t-slot washer on the front, and the fence is a fancy box section aluminium which seems very strong. I think the bar is purchasable separately via their website to make your own jigs etc.
The end of the fence telescopes out to about 42"/1050mm
To change the fence angle you loosen the wingnut and slide the fence to the desired angle while depressing a plunger button underneath the red part of the brace into a preset hole then tighten the wingnut and release the button. There are a bunch of preset holes to lock the fence to the commonly used angles or you can lock it off at any other angle you want. I've attached a few more pics to show the details
Osborne don't have a distributor in Aus but were happy to take and dispatch an order via email. They suggested that as a security precaution the order, credit card number and expiry details be sent in three separate emails which I did and all has turned out fine. Postage is a killer so if you know anyone going to the US or Canada they are easy to pick up there. I first saw this fence on a visit to Canada last year and was kicking myself I didn't buy one then. All worked out well though.
-
31st January 2008, 01:15 PM #6GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Have had mine for several years now. Highly recommended!
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
31st January 2008, 04:14 PM #7Awaiting Email Confirmation
- Join Date
- Jan 2007
- Location
- Goulburn NSW
- Age
- 89
- Posts
- 913
I tried to register at the checkout on their site but the state and postcode is for the USA. I have sent them an email to find out how to get around this. They accept PayPal which I use where ever possible. Let you know the outcome
les
-
31st January 2008, 04:44 PM #8Novice
- Join Date
- Nov 2007
- Location
- Melbourne, Victoria
- Posts
- 22
Hi Les
The same thing happened to me when I initially tried to buy the thing, but it's easy to order via email via the website or by fax.
Cheers
Mike
-
8th June 2011, 09:53 AM #9SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- St George area, Sydney
- Age
- 65
- Posts
- 640
resurrecting this post, I just got an email from Woodcraft that the Osborne miter gauge is on special for $99 until 25 June.
I bought recently from Woodcraft and they are fairly expensive with freight (Fedex), I note the price is the same atthe Osborne site, I will see what they want for freight
-
9th June 2011, 02:08 PM #10SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- St George area, Sydney
- Age
- 65
- Posts
- 640
whether you buy through Woodcraft or direct from Osborne it costs about USD60-70 to send to Aust by Fedex
I am going to buy one direct from David Osborne
-
16th June 2011, 10:30 AM #11SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- St George area, Sydney
- Age
- 65
- Posts
- 640
I have just ordered my EB3 mitre gauge for US$152.15 including freight while it is on special for $99, so basically it means I am getting it at the normal US price.
Similar Threads
-
Incra Mitre Gauge for TSC10-HB
By MurrayD99 in forum HAND TOOLS - POWEREDReplies: 17Last Post: 9th June 2007, 07:35 AM -
Sloppy Mitre Gauge
By Gazza in forum TRITON / GMCReplies: 7Last Post: 29th July 2005, 01:23 AM -
Mitre Gauge
By snow in forum WOODWORK - GENERALReplies: 7Last Post: 13th March 2005, 09:45 PM -
Woodhaven Mitre Gauge Track
By micknews in forum HAND TOOLS - POWEREDReplies: 2Last Post: 4th February 2005, 09:40 AM