Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 26
  1. #1
    Join Date
    Apr 2005
    Location
    sydney
    Posts
    3

    Default portable table saw

    I'm new to the forum so hello to everyone out there.
    I am looking at buying a portable 10" table saw and would appreciate any advice/comments.I am restricted for space as my shed is small and will need to set the saw up outdoors when I use it,I will also use it for work from time to time.

    The list so far includes:Metabo/Electra Beckum ,Porter cable,Dewalt,Bosch.I have read a little about these saws but have not seen any comparisons. If anyone has bought or is familiar with these, or any other portable saws it would be great to hear your comments.
    Thanks.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2005
    Location
    Pennsylvania USA
    Age
    57
    Posts
    15

    Default

    Hi there revesy I just bought a Ryobi folding 10" contractors saw and I love it I have the same problem not enough room in my shop. I bought this unit and everything has a special place for it. Like the fence has a place for it and miter has its own holder under the table. I sawed with it takes a 4x4 sheet of plywood without worring about tipping it over. And when you are done using it fold the legs and stick in the corner doesn't take much room I'm very pleased with it. A little advise though if you pick one up just remember they put a peice of styrofoam in between the motor and the table. I was wondering why the blade wouldn't raise there was the answer. Hope this helpful.
    Glenmore

  4. #3
    Join Date
    May 2002
    Location
    Sydney- Hawkesbury area
    Posts
    116

    Default

    Hi,

    I have just spent a lot of time investigating a suitable portable table saw for my workshop.
    I finally opted for the Bosch GTS10 over the Dewalt not because of the price but because of the general overall finish, quality and the saw guard- a big factor!!!

    I have now made a mobile storage box underneath to the same height as my larger mobile work bench and am now as happy as.

    For versatility and quality I think extremely good value. Panther Power Tools at Mitchinbury carry a cheaper version made at the same place in Taiwan-Rexton or something like that and there is no comparison in the quality.


    To each his own and Bosch seems to have got this right.
    Paul
    PEN

  5. #4
    Join Date
    Apr 2005
    Location
    sydney
    Posts
    3

    Smile Thanks guys

    Thanks Glenmore and Pen. Iwill check out all the portable table saws at the 'working with wood' show in Sydney in june.
    Cheers
    Reevesy.

  6. #5
    Join Date
    Apr 2005
    Location
    Blue Mountains, NSW
    Posts
    305

    Default

    A mate bought the Bosch & it **** itself in the first hour. Bosch repaired it & the same thing again, the contact brush on one side chewed out in 1hr. They've since given him a new one & it seems ok now.I too am pondering this purchase Reevesy, & being a tradesman using power tools for a living I'll tell you what I know about power tools. Forget about brand loyalty, each tool must be judged on its merits, & some brands do particular tools better than others. When it comes to portable table saws, there is a fairly sorry choice available. They are all made in china (what isn't?) when you look closely it shows. In the trade you dont see much Bosch stuff, & my mates experience proved why. The Dewalt is OK & the rack & pinion fence is a good idea but it is prone to problems. The Makita & Porter Cable are basic. no frills here. The Electra Beckum looks in need of a modern redesign & weight loss diet. They could all do with more power. If your not asking too much from your saw, I'd go the Makita or the Dewalt, just remember that Dewalt Australia are shocking to deal with if anything goes wrong(thats from the mouth of my tool repairer). Personally I wouldn't buy any of them. I've been looking at the Festool CS70 Presicio, (but its a lot more dosh). Why? Nothing me more than having an onsite tool failure, & Festool is the only tool manufacturer that has not let me down. In the face of cheap inferior Chinese imports fuelling a societal addiction to low cost landfill, Festool have steadfastly maintained excellence of design & quality in the power tool department. The basic Precisio CS 70 is about $2200 (double the others) but take a look at it! 2200 watt dust sealed motor with overload protection & air intake filter, lightweight (35kg) fold down legs for easy portability. Over & under dust extraction (think about that if your going to cut MDF, the new asbestos). Its also a pull saw, so you can do huge crosscuts. Precision fence & mitre gauge. Easy blade change, optional table extension, outfeed table, sliding table attachment. Its in a class of its own, & if your not on a tight budget, its the only way to go.

  7. #6
    Join Date
    Apr 2005
    Location
    Brisbane
    Age
    64
    Posts
    99

    Default

    I've got an Elu TGS 172 (blue model), 25 years old and still going strong, its had 5 apprentices hammer it over the years and you still can't stop it. I replaced the guard about 2 months ago and a new switch a few years back but thats all I've had to do, still has the same induction motor. I think Elu was taken over by Black & Decker, then they became Dewalt.

    I have seen them for sale recently as a Dewalt, and they look almost the same as mine. I couldn't recommend it more highly.

  8. #7
    Join Date
    May 2002
    Location
    Sydney- Hawkesbury area
    Posts
    116

    Default

    Hi Everyone,
    Isn''t what we are discussing here - personal tastes?

    We all don't drive the same brand of car, live in the same design house, or have the same tastes when it comes to any number of things.

    We all find our own niche in this world.

    Take it from me, coming back after 15 years with Altendorf panel saws the rest is just rubbish, but we have to meet the needs that dollars, space and user requirement sets. That's just life.

    We all have good and bad stories about cars we have purchased from the lemons to those we druel over- like my restored MGB. Most of you may just see it as an expensive toy but to me it is a 36 year old gem, into which a lot of effort and pain has gone into for me to enjoy it today.

    I have two Shopsmith 5in1 machines from the USA- over 50 year old cast iron relics to some, but for me with tme and effort I can produce what I produced in joineries, at home in my double garage, when I move the cars out! Changed circustances require a diffferent methodology.

    Same applies to useage. If you use it every day to earn a living you have a different approach to when you use it twice a month to do a small job!

    My mate owns a large chain hardware shop. He is constantly suprised by the change in attitude from the tradesmen who purchase power tools from him. Ten years ago it was all about quality. To many today it is about price to minimise the cost(because they won't insure) when it gets knocked off on site etc.

    That's a factor I would have never believed would become a factor for good tradesmen.

    Elu, the old Makita, Hitachi, the old Skil, Altendorf, Brandt and so many others brands have been the standard in the joinery industry for years. The world has changed- Ryobi, Black & Decker and heaven forbid, GMC provide a cheap alternative in what is now an established "throw away society". - Fact of life!

    Dollars and value for useage requirements are the drivers. It's no value in being the best tradesman, with the best quality gear if the market won't pay the price charged. Add to that the cost of employment of labour and the decision is easy - compete or get out. I chose the later and have no regrets for it. That chapter has gone and another has begun.

    I used to say to clients when they wanted to bargain too hard on the price " I can go broke sitting in the joinery doing nothing, as easily as I can doing a job for you where there is no profit above actual costs." That famed expression "that I don't work for nothing!" You can read the histories of those who have tried this philosophy every day in the SMH-Business Closures section.

    Again, we all respect each others views ,but in the end run, we all make our own decision on our own perception of the drivers behind our decision.

    Philosophy lesson at an end!!!!!!!!

    Paul
    PEN

  9. #8
    Join Date
    Apr 2005
    Location
    Blue Mountains, NSW
    Posts
    305

    Default

    Hi Paul, I hear what your saying, & the point you raise about tradesman buying cheap tools for fear of theft is a pertinent one. I also agree that the world needs different quality tools for different people. The weekend warrior may only use his tools 2 - 3 times a year, so his GMC collection is going to last him well. My point is that from a tradesmans perspective, its becoming increasingly difficult to select well made reliable tools. The all powerfull price driven marketing drive means that reliability & build quality is suffering, & what we are going to be left with is glorified landfill. People that produce quality items are losing business & the viability of their operation becomes shaky. Whats the point? Bigger landfills, bigger trade defecit, more of the planets resources wasted & a population that is unable to value quality. Its a slippery slope.

  10. #9
    Join Date
    May 2002
    Location
    Sydney- Hawkesbury area
    Posts
    116

    Default

    Carpenter,
    I am glad to here the committment to quality is a least shared by others.

    I currently employ 240 apprentices and the biggest task I face on a day-to-day basis is maintaining the quality of training, supervision, OHS and last but not least attitude. I am known to have an iron fist, but it pays off in the quality outcome we achieve. Something throughout industry we are respected for.
    We supply our boys on commencement with a tool box valued at over $1100.00 and there is nothing in that tool box that is not of PREMIUM quality.

    For us it pays off in a 93% completion rate at the end of 4th Year.

    Others say weare absolutely crazy, ut we take a great deal of pride in our outcomes and so do the boys and girl!

    Regards
    Paul
    PEN

  11. #10
    Join Date
    Jan 2005
    Location
    Sydney
    Posts
    1,205

    Default

    It is more about buying a the right tool for a job, if you are running a business, thats the way i look at, all of my tradesmen on site supply 95% of their own gear this is all brand name, good stuff, no GMC's etc allowed on my job's.

    In the factory all the big gear is brand name top shelf stuff, not new but kept in top nick and maintained with sharp baldes/knives used all the time.

    I buy tools to be used on site like Festol track saw's, Fein multi masters, under cut saws,
    But i do buy GMC tools like power drills to be used for mixing leveling compund, i can expect it to get stuffed and just chuck it out.

    When buying tools, if i need it i buy it, if its cheap i buy it but a good brand (Hilti, Still, Kango, Makita, Dewalt, Metabo, etc) i buy tools from Auctions all the time from companys closing up for one reason or an other.

    If you are a serious tradesmaen you can not expect to turn up to a job with cheap tools its like a panel beater driving a smashed up car. One or two cheapeis is ok.

    At home if its a minor tool buy a cheapey but for a serious item used every time you are out in the shed buy a decent tool,

  12. #11
    Join Date
    Jul 2007
    Location
    USA
    Posts
    1

    Default portable saw guide

    I have a very small workshop, so I purchased the saw guide and folding table from eurekazone. I have been very pleased with it and it does almost everything that a tablesaw will do. The website is: www.eurekazone.com/

  13. #12
    Join Date
    Sep 2007
    Location
    Melbourne
    Posts
    2

    Default Gts 10

    Quote Originally Posted by PEN View Post
    Hi,

    I have just spent a lot of time investigating a suitable portable table saw for my workshop.
    I finally opted for the Bosch GTS10 over the Dewalt not because of the price but because of the general overall finish, quality and the saw guard- a big factor!!!

    I have now made a mobile storage box underneath to the same height as my larger mobile work bench and am now as happy as.

    For versatility and quality I think extremely good value. Panther Power Tools at Mitchinbury carry a cheaper version made at the same place in Taiwan-Rexton or something like that and there is no comparison in the quality.

    To each his own and Bosch seems to have got this right.
    Paul
    PEN
    G'day Paul,

    I was wondering if you could help me out, I have recently purchased a GTS 10. And after setting it up according to the bloody tiresome instruction manual they supply, I am unable to attain the 635mm cutting width they claim you can achieve? It stops at 620mm? I can remove the allen key stoppers, but that does'nt seem correct. Did you have the same problem? I can;t see a way of adjusting this out. I hope you can help, it would be greatly appreciated.

    Cheers Matt.

  14. #13
    Join Date
    Oct 2007
    Location
    India
    Posts
    6

    Default

    Hi I am new to this forum. I am also looking at acquiring a bosch gts 10. Does it take a dado set? Apart from ripping, crosscuts and mitre. Thanks

  15. #14
    Join Date
    Jun 2007
    Location
    Melbourne, VIC
    Posts
    395

    Default

    I think it does take a dado set, but you have to leave out one of the washers and just use the nut.
    *Disclaimer* I read this on GaryKatzonline.com



    I'm wondering what people who got the Dewalt DW744 are using for a stand. I want one that's mobile and folds. Anybody know if Rousseau sellls their saw tables here?
    Do nothing, stay ahead

  16. #15
    Join Date
    Oct 2007
    Location
    kingscliff nsw
    Age
    68
    Posts
    73

    Default

    The old ELU flip saw is still available, sold by De walt,around $1100 from memory.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •