Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
-
13th July 2021, 12:12 PM #16SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
They do come in smaller slider - the SCM's online brochure only have them available in 3.2m, but they are available in 2.2m, 3.2m and 3.8m.
Again, SCM's website/info on their machines are very limited especially the L'Invincibile line - there is less information on SCM website compare to their Class/Nova/Minimax range - You'd think you're spending more money there should be more info, but NO..... in some instance you get more information from second hand dealer who try to sell them.
I have seen the L'Invincibile saw in person when I visited SCM a while back (also bump into a guy who runs a business with almost everything in L'Invincibile), I know what to expect, the good and the bad.SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
13th July 2021 12:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd February 2024, 02:18 PM #17
Your SCM L'Invincible advice
Hi Albert,
I'm now in a similar position to the one you were in - making a choice between SCM's SI3 and Felder's Kappa 550. Theoretically the Kappa 450 would have suited me but it has a smaller screen and the software on the 450 is limited to x-motion programs - you have to go to the 550 or 590 to get the e-motion/plus software.
After having the SCM machine for a period, are there any insights good or bad that you can offer?
Cheers
-
23rd February 2024, 10:37 PM #18SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
in theory Felder is a better saw, but you need to see it and put your hand on both of them to appreciate the quality of the L'Invincibile series.
I am not too fussed about software, I havnt used much of the software ability on my si X, ( am too busy) apart from the usual parallel fence movement or angled cut.
a few things that could be the "bad":
1. the touch screen does not swivel, the angle of the screen is fixed, you can swing it but you can not swivel it on the si X
2. you need air to run the panel saw
3. take about 2 minute to turn on the si X.
The good
Other than that, the saw is a 1128kg monster, you can throw anything at it, SCM's online information does not do the machine justice AT ALL.
Also if I want to, I can buy a longer carriage in the future, its about 10k Euro, I doubt Felder can do this with their saw. 10k Euro may sound crazy for the slider carriage but the base machine itself cost 45k Euro excl tax and shipping.
The elderly gentleman who came out to setup the saw was a very experienced technician, gave me a superb session on calibrating and trouble shooting the saw (not that it needs calibration at all). he prefers working with SCM machine, said its easier to work on.SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
24th February 2024, 01:42 PM #19
SCM Advice
Hi Albert,
Many thanks for taking the time to reply given you're busy. Both machines are of high quality and I doubt there are any issues with either but it was worth checking so thanks for confirming the quality of the L'invincible.
CheersHobbit
Lover of Woodworking Machines
-
27th February 2024, 10:27 AM #20SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
Similar Threads
-
Felder FB-510
By Austin_Turner in forum PRODUCT REVIEWSReplies: 4Last Post: 12th April 2019, 09:19 PM -
My first Felder
By Albert in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 7Last Post: 17th July 2018, 09:34 AM -
Felder AF 12 | Ø 120 mm
By thumbsucker in forum DUST EXTRACTIONReplies: 2Last Post: 27th March 2017, 08:04 PM -
Felder RL 125 Any have one?
By joez in forum DUST EXTRACTIONReplies: 11Last Post: 22nd April 2009, 03:02 PM -
Hey Felder
By Barry_White in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 14Last Post: 28th June 2006, 12:42 PM