Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 16 of 16
-
23rd December 2013, 07:45 PM #16SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
I made a jig very similar to this and find it very good. It allows a much wider piece of wood to be used between the blade and the fence and therefor feel it to be safer than other methods. It is no trouble to reset the fence after each cut and is easy to get consistent widths.
-
23rd December 2013 07:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Challenge to Create the Ideal Router Table
By rodm in forum ROUTING FORUMReplies: 215Last Post: 26th July 2021, 08:34 PM -
This Jig Sucks ... for Ripping Thin Strips
By Penl8the in forum TUTORIALSReplies: 5Last Post: 3rd April 2013, 09:51 PM -
New Domino Fence Plate for 4mm Cutter and Thin 8-14mm Stock
By Lignum in forum FESTOOL FORUMReplies: 14Last Post: 10th September 2010, 08:03 PM -
ripping thin sheets on TS
By SteveMcM in forum TABLE SAWS & COMBINATIONSReplies: 9Last Post: 21st April 2008, 05:14 PM -
Domino dowels with thin stock
By Flowboy in forum FESTOOL FORUMReplies: 7Last Post: 25th July 2006, 10:42 AM