Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
17th September 2021, 08:42 PM #1New Members
- Join Date
- Sep 2021
- Location
- East Gippsland, Victoria
- Posts
- 3
Seeking Information for unknown Table Saw, Jointer, Thicknesser Combination Machine
Hi All. Our woodcraft group has acquired a combination machine. Unfortunately we do not have any documentation nor can we identify a band/manufacturer.
The machine incorporates a 250mmTable Saw, Jointer and thicknesser. There is also provision to attach a spindle moulder.
The Machine has one motor and utilises v-belts and pulleys for driving the saw and planer head. It also uses a chain drive for the input drive roller for thicknesser. The Saw and planer drives are separated utilising a sliding drive shaft with centre pin to engage separate pulleys.
I have or hope I have attached a couple of photos in the hope someone may be able to identify the manufacturer and/or point me in the right direction to obtain some documentation.
Thanks
-
17th September 2021 08:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th September 2021, 09:11 AM #2
Welcome to the forum.
-
19th September 2021, 08:51 AM #3New Members
- Join Date
- Sep 2021
- Location
- East Gippsland, Victoria
- Posts
- 3
Thank you
Similar Threads
-
Does anybody have any information on this old Abbey combination machine?
By Pav in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 8Last Post: 24th August 2022, 11:00 PM -
Seeking information on Progress CTV-700 Milling Machine
By loc243 in forum METALWORK FORUMReplies: 3Last Post: 25th July 2008, 06:52 AM -
Combination Jointer & Thicknesser
By Eccles in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 3rd April 2007, 11:06 PM -
Seeking bandsaw, jointer & thicknesser access in Brisbane
By FlyingDuck in forum WOODWORK - GENERALReplies: 5Last Post: 31st August 2005, 10:07 PM