Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Table Saws vs Radial Arm Saws
-
9th March 2007, 09:26 AM #1Intermediate Member
- Join Date
- Dec 2006
- Location
- Albany W.A.
- Age
- 83
- Posts
- 26
Table Saws vs Radial Arm Saws
A mate of mine tells me that a good radial arm saw will do everything a table saw will do and is more versatile. What are the pros and cons of each? What are your preferences and why? I am going to buy one of them for furniture making and general hobby work . What make & model of saw would you recommend and why? Would appreciate the information that the knowledgeable folk of this forum can share.
Ron
-
9th March 2007 09:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
9th March 2007, 09:42 AM #2
-
9th March 2007, 09:59 AM #3
Simple but;
Table saw if you need to rip timber
Radial if you need to cross cut timber
I think a good radial arm saw, festool circular saw with guide (cutting down sheets) and a very good 21" bandsaw would be replace a TS.
cheers
dazzler
-
9th March 2007, 11:20 AM #4GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
I'm fortunate [greedy] and have both
The radial arm is great for cross cutting - up to 300mm for my 10" DeWalt [actually made by Tatry, Italy]. Never felt I had any safety issues with mine and have used [and still do] since the mid 70's. You can rip timber by turning the head parallel to the fence as well as being able to cut compound angles but your widths etc are restricted to the arm's length of travel.
For every upside there of course is a downside - to set up accurately does take time and to reset it for crosscutting accurately also takes time - I have made up some jigs to allow me to make a few cuts [mitres] without setting/resetting etc. Let me know if you decide to go this way.
The cabinet saw, I have only had since last year and I'm still learning all of its capabilities/limitations - but I'm enjoying it.
I don't really favour one over the other - each has its uses [to me].
I can't make the decision for you but by all means do your research - hope this helps you out.
Regards,
Bob
-
9th March 2007, 11:26 AM #5
I've had both,
The RAS is great for docking etc
The table saw is more versatile in a home workshop
-
9th March 2007, 12:22 PM #6GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
-
9th March 2007, 01:14 PM #7
One of the major differences is the accuracy of the reference blade height to reference surface. eg For slot cutting or rebate cutting the table saw will provide a consistant/accurate distance from the table to the top of the blade. With radial arm saws there may be some variation in the depth of cut as the cutting depth to reference (table on opposite side of workpiece) may vary slightly. Not an issue if cutting right through.
-
9th March 2007, 09:00 PM #8GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
The others here are correct, you can.......
Crosscut/dock
Rip but only narrow widths and this isn't the safest of things to do though - care must be taken.
Mitre cutting
Compound mitre cutting
You can even fit a dado blade to it.
Mathed with a table saw, they are an awesome team.
-
9th March 2007, 09:10 PM #9
-
10th March 2007, 06:29 PM #10Member
- Join Date
- Nov 2006
- Location
- King Island, Australia
- Posts
- 58
I have all three. (TS, RAS & CMS). I got the radiial arm first (12" long arm Dewalt) a long time ago. It will do all but mostly as a compromise. I don't like the cross cut action, as the saw works (to my way of thinking ) backwards. I always like to work the timber against the cut. The RA works best when pushing away from you, but that is a dangerous practice to get involved with. (Guilty!). The one I would toss is the RAS.
Donald
-
10th March 2007, 07:40 PM #11
TS in the more versatile tool.
I am a total toolaholic and have no pangs of aquisition for a RAS.and never even thought of buying one, With a decent TS and BS you got it all pretty much covered.ray c
dunno what's more fun, buyin' the tools or usin' em'
-
12th March 2007, 12:24 AM #12Intermediate Member
- Join Date
- Dec 2006
- Location
- Albany W.A.
- Age
- 83
- Posts
- 26
Very helpful replies. Thank you for that. I have a good band saw - and taking on board the offered information - and not prepared to buy 'the lot' - I am now leaning towards the table saw with which I am more familiar - and have some concern for the possible safety factors using a machine I am not so familiar with. (I know TS are dangerous also) Like the look of the Jet Supersaw.
-
14th March 2007, 04:46 PM #13GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
If it looks dangerous it generally is dangerous and ripping using a RAS looks bloody dangerous to me.
CHRIS
-
14th March 2007, 05:22 PM #14
A table saw and a home made crosscut sled will do for just about anything you care to make.
I also have a very cheap (GMC !) CMS for quick, but not so accurate, crosscuts. It's just handy to have sitting in the corner.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
Similar Threads
-
Finding table saws in NZ
By amorangi in forum WOODWORK - GENERALReplies: 5Last Post: 25th May 2006, 11:58 AM -
Fixed splitter table saws
By monoman in forum TABLE SAWS & COMBINATIONSReplies: 11Last Post: 20th July 2005, 12:10 AM -
Rapier (?) converts power saw into radial arm saw
By niblung in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 28th May 2003, 07:10 PM -
Radial Arm Saw
By Dylan SJ in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 28th February 2003, 07:01 PM