Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 58
Thread: table saw vs panel saw
-
1st February 2008, 03:11 PM #1Member
- Join Date
- Aug 2007
- Location
- Kyneton, Vic
- Posts
- 86
table saw vs panel saw
Can someone tell me the advantage of a panel saw over a table saw and vice versa?
How do I choose a saw?
I currently have a Triton which has been moved several times and now I'm missing many bits so I'm in the market for a new saw.
I have two needs:
1. My woodworking projects eg tables, cabinets etc in solid wood
2. To build some cupboards, vanity units etc for our new house (owner builders)
Any advice gratefully received.
Thanks and Regards
Ralf
-
1st February 2008 03:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st February 2008, 03:17 PM #2
I don't think you want a panel saw.
Panel saws are designed for handling sheet materials like ply and chipboard. They have a large sliding table and usually have a scoring blade that's designed for clean cuts on melamine and laminates. They have a large footprint and need a lot of room around them to operate. You'll find these mostly in places making boxes like kitchen cupboards.
Table saw is a pretty general term, but you're probably referring to a cabinet or contractor type saw. This would be the most common type of saw that a woodworker working with solid timber would have. It would be more like an improved version of your Triton than a panel saw would be."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
1st February 2008, 03:23 PM #3Member
- Join Date
- Aug 2007
- Location
- Kyneton, Vic
- Posts
- 86
Thanks for that.
Yes its a cabinet makers saw I'm looking at but I do want to be able to handle sheets for making the vanities etc - I like the idea of the cabinet saw with an extension to handle the odd sheet.
-
1st February 2008, 03:37 PM #4
People who handle a lot of large sheets make outriggers or extension tables for the saw. You can buy a cabinet saw with a sliding table that operates similar to a panel saw but they have a reduced capacity, so it's a compromise.
I usually break large sheets up with a hand held circular saw first but I don't use them a lot."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
1st February 2008, 03:49 PM #5
I'd say it works like this:
...we all want a panel saw. Few of us have a factory sized shed to work one in, so settle for a table saw.
Removable outriggers are often one of the first add-ons...
- Andy Mc
-
1st February 2008, 04:00 PM #6
I don't know about that. I don't really feel any great want for a panel saw. It's a fairly specialised machine optimised for handling sheet materials. I think a decent cabinet saw is a better all-round workhorse for the jack of all trades.
But if one was on offer, I'd find room for it"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
1st February 2008, 04:02 PM #7
-
1st February 2008, 04:02 PM #8Member
- Join Date
- Aug 2007
- Location
- Kyneton, Vic
- Posts
- 86
OK so if we all want a panel saw are there any circumstances where a cabinet saw is better? I've not built my she yet and we are on 120 acres.
-
1st February 2008, 04:04 PM #9Member
- Join Date
- Aug 2007
- Location
- Kyneton, Vic
- Posts
- 86
Oh, and then there's the small issue of price..... What would I pay for a good cabinet saw vs a panel saw?
-
1st February 2008, 04:09 PM #10
If you're working on relatively small pieces (ie. aren't cutting up big sheets) then a cabinet saw lets you get up much more close and personal. Every joinery I've been in that has a panel saw also has a tablesaw or two.
A TS really is more practical in a home workshop.
Not that I've really looked around, but it appears to me that as the panel saw is more specialised and larger, so is the price tag. Easily another 0 on the end compared to a similar quality TS.
- Andy Mc
-
1st February 2008, 04:11 PM #11
I have a table saw with a sliding table, but it does not have a scribing blade. To get really fine cuts I can score one side, flip the panel then complete the cut. When not in use the table can be folded down out of the way. A drawback is the rail does not fold out the way and can be a real nuisance when trying to move stuff around a small workshop (2 car garage).
If I could get the money back and start again, I think I would be getting the Festool saw and rails for panels and have the TS by itself, without the slider. It would cost more that way but the results would be better and more flexible. A panel saw is out of the question size-wise, but also it would be a waste. If I get to the point where I want to cut a large quantity and do it well it would be cheaper to get someone in the business to do it for me. They would get the materials cheaper and the cutting would be high quality.
-
1st February 2008, 04:12 PM #12
A good cabinet saw will cost you around $2,000-3,000 - a good panel saw is more like $10,000+. One of the reasons is that a panel saw is intended for industrial applications and they're usually big heavy duty things made in Europe, whereas a cabinet saw is more aimed at the small custom furniture maker or hobbyist and you can get good cheap ones from SEA.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
1st February 2008, 04:14 PM #13Member
- Join Date
- Aug 2007
- Location
- Kyneton, Vic
- Posts
- 86
OK, sounds like cabinet saw is the go and I can get an extension.
So how does one determine the quality of these things and how much does accuracy vary by price?
What determines the price?
-
1st February 2008, 05:47 PM #14
" What determines the price?"
The depth of your pockets...
Seriously set yourself a budget, real cabinet saw's start with the TSC10HB($1500ish there are some cheaper)... and end up at about the Sawstop or powermatic PM2000($5000+). You need to consider do you want just a saw, as there are good combo machines available prices range from $5k upwards(sky's the limit)they can have up to 5 machines in 1.
If I was to upgrade my saw(tsc10hb orange flavoured)I would go for a Sawstop, they have the best safety device(other than yourself)on a table saw period and they are a very good quality saw to start with.....................................................................
-
1st February 2008, 06:21 PM #15Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Panel saw
We have a business here in Brisbane called "Wood n' You" where you can get your panels cut to spec or do them yourself. (It's onthe southside for those of you on the north side0
Maybe there are businesses like this in other cities. Saves lots of money that you can spend on other toys.
Similar Threads
-
Sliding Panel Saw vs Cabinet Table Saw?
By RossM in forum TABLE SAWS & COMBINATIONSReplies: 35Last Post: 25th April 2007, 05:38 PM -
Anyone need a panel saw??
By chipboard in forum HAND TOOLS - POWEREDReplies: 5Last Post: 18th May 2006, 03:35 AM -
Panel lifter?
By greenie512 in forum WOODWORK PICSReplies: 13Last Post: 18th April 2006, 02:44 AM