triton Mk3 information sought - missing part/s

**desbromilow** · 22nd December 2014, 05:07 PM

P1010018mu25.jpg

G'Day,

I am trying to help someone ressurect a Triton Mk3 combination machine. - There are some pieces missing which go through the hole marked.
I'm hoping someone has one of these machines, and can reply with photos of the mising parts so we can fabricate replacements.

ALSO - if someone has the part used to hold a router in the machine for use as a router table, can they please reply with a photo and some dimensions?

thanks,
Des

**crowie** · 22nd December 2014, 05:15 PM

Table locking Pins - google search below of images of them....I hope that's a start....cheers crowie

https://www.google.com.au/search?q=t...ed=0CAYQ_AUoAQ

plus a google search on "triton mk3 locking pins" brings up a number of older WWF threads....

https://www.google.com.au/search?q=T...3+locking+pins

**desbromilow** · 22nd December 2014, 08:37 PM

Thanks Crowie!!!!!!!! - we can make new ones based on those images (and the magic 9mm length one article mentioned)

Does anyone have the dimensions of the router table fixture?

This has been rescued with the intent to turn it into a router stand for making casting patterns.

Thanks,
Des

Originally Posted by crowie

Table locking Pins - google search below of images of them....I hope that's a start....cheers crowie

https://www.google.com.au/search?q=t...ed=0CAYQ_AUoAQ

plus a google search on "triton mk3 locking pins" brings up a number of older WWF threads....

https://www.google.com.au/search?q=T...3+locking+pins

**Nifty Nev** · 22nd December 2014, 08:47 PM

See this link http://www.ebay.com.au/itm/Triton-MK3-L-shape-pins-each-PN-WCA103-/181598197455?pt=AU_Tool_Parts_Accessories&hash=item2a481896cf

**crowie** · 22nd December 2014, 08:59 PM

Originally Posted by desbromilow

P1010018mu25.jpg

ALSO - if someone has the part used to hold a router in the machine for use as a router table, can they please reply with a photo and some dimensions?

thanks,
Des

here's the setup manual - if someone else hasn't come forward, I'll measure mine on Wednesday....

https://www.carbatec.com.au/pdf/manu...0Instructs.pdf

**crowie** · 23rd December 2014, 09:09 PM

Originally Posted by crowie

here's the setup manual - if someone else hasn't come forward, I'll measure mine on Wednesday....

https://www.carbatec.com.au/pdf/manu...0Instructs.pdf

Just to confirm... you're wanting the measurements of item#51 on page #2??

**desbromilow** · 23rd December 2014, 11:04 PM

Originally Posted by crowie

Just to confirm... you're wanting the measurements of item#51 on page #2??

Crowie,

ideally the dimensions of items #51, and #11 if possible, - we will end up making most of what fits under the standard Mk3 table.

thanks,
Des

**crowie** · 24th December 2014, 05:00 PM

Sorry Des, I nearly forgot, but after a "pa nap" I got the following....
Router Plate - 360mm x 198mm and Sub Plate - 275mm x 194/195mm
Photos attached....
I hope that helps...
Happy Christmas, cheers, Peter [aka crowie]

PS - If you've in Karratha drop in on my niece at the Bakers Delight and say "G'Day" ....