Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
22nd December 2014, 05:07 PM #1Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
triton Mk3 information sought - missing part/s
P1010018mu25.jpg
G'Day,
I am trying to help someone ressurect a Triton Mk3 combination machine. - There are some pieces missing which go through the hole marked.
I'm hoping someone has one of these machines, and can reply with photos of the mising parts so we can fabricate replacements.
ALSO - if someone has the part used to hold a router in the machine for use as a router table, can they please reply with a photo and some dimensions?
thanks,
Des
-
22nd December 2014 05:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd December 2014, 05:15 PM #2
Table locking Pins - google search below of images of them....I hope that's a start....cheers crowie
https://www.google.com.au/search?q=t...ed=0CAYQ_AUoAQ
plus a google search on "triton mk3 locking pins" brings up a number of older WWF threads....
https://www.google.com.au/search?q=T...3+locking+pins
-
22nd December 2014, 08:37 PM #3Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
Thanks Crowie!!!!!!!! - we can make new ones based on those images (and the magic 9mm length one article mentioned)
Does anyone have the dimensions of the router table fixture?
This has been rescued with the intent to turn it into a router stand for making casting patterns.
Thanks,
Des
-
22nd December 2014, 08:47 PM #4Senior Member
- Join Date
- Mar 2014
- Location
- West Wodonga
- Posts
- 114
-
22nd December 2014, 08:59 PM #5
here's the setup manual - if someone else hasn't come forward, I'll measure mine on Wednesday....
https://www.carbatec.com.au/pdf/manu...0Instructs.pdf
-
23rd December 2014, 09:09 PM #6
-
23rd December 2014, 11:04 PM #7Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
-
24th December 2014, 05:00 PM #8
Sorry Des, I nearly forgot, but after a "pa nap" I got the following....
Router Plate - 360mm x 198mm and Sub Plate - 275mm x 194/195mm
Photos attached....
I hope that helps...
Happy Christmas, cheers, Peter [aka crowie]
PS - If you've in Karratha drop in on my niece at the Bakers Delight and say "G'Day" ....
-
24th December 2014, 05:53 PM #9
Des, did you see this lot...
https://www.woodworkforums.com/f275/assorted-triton-accessories-spare-thirty-dollars-rubbish-191126
-
24th December 2014, 08:59 PM #10Senior Member
- Join Date
- May 2010
- Location
- FIFO to Pilbara
- Posts
- 121
Similar Threads
-
Missing part from thicknesser
By eisbaer in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 10th July 2013, 02:09 PM -
help with missing Jet part
By Lumber Bunker in forum WOODTURNING - GENERALReplies: 22Last Post: 9th June 2012, 10:54 AM -
4-way tool post, part missing?
By neksmerj in forum THE HERCUS AREAReplies: 17Last Post: 8th December 2008, 08:19 PM -
Bevel Cut on W/C 2000 - Missing part ?
By Utterbar in forum TRITON / GMCReplies: 4Last Post: 7th October 2008, 09:06 AM -
Parts missing from Triton Router
By princhester in forum TRITON / GMCReplies: 7Last Post: 17th September 2006, 08:46 PM