Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
18th May 2015, 08:47 PM #1
TS rip fence bow and spongy lock-down handle
Two questions:
1) Started noticing recently that the lock-down handle on the rip fence (10" Proshop) is a little "spongy". Basically when I lock the handle to lock the fence it springs back slightly and just generally feels a little "squishy". I've had a look at everything and cannot see any obvious obstructions, worn bits, etc.
2) The aluminium face on my fence has been slightly bowed (concave) for a while now. I'm thinking the best work around is to attach an auxiliary fence.
Any suggestions/recommendations?
Thanks,
GarethAnnular Grooved Nails....Ribbed for the Woods Pleasure?
-
18th May 2015 08:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Brand new Harvey HW110LGE-30 but fence won't lock in place
By Larks in forum TABLE SAWS & COMBINATIONSReplies: 19Last Post: 7th April 2015, 09:57 PM -
Tail Stock: To Lock or Not to Lock
By brendan stemp in forum WOODTURNING - GENERALReplies: 25Last Post: 12th October 2012, 07:52 PM -
Connecting 14mm Lock to 12 mm Lock floating floor
By biwood in forum WOODWORK - GENERALReplies: 2Last Post: 15th September 2011, 08:42 PM