Thanks: 0
Likes: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Tsc10
-
13th December 2020, 06:17 PM #1
Tsc10
my dear table saw has been slowly getting upset with me.
Turn it on all good
run timber through does not matter what size/thickness etc
but as soon as I finish cutting but leave motor running, getting next piece ready to cut
it develops this whining/screaming noise that makes me suspect something is wrong but no idea what. esp when just running and not 'working'
background I purchased this brand new from Adelaide, brought over here, then lifestyle went pear shaped we moved house several times and this stayed unassembled, still in its cartons in a shipping container for over 5 + years. Got it assembled early last year (I think) and this noise has just got worse.I would love to grow my own food, but I can not find bacon seeds
-
13th December 2020 06:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th December 2020, 06:42 PM #2
Whining/screaming noise suggests dry bearing in either the motor or the arbor, copes with initial turn on but is steadily expanding as heat builds up. Make a cut and everything is under more load so heats up faster, turn your back and the bearing gets to the point where the balls don't have the clearance to rotate and start to skate instead, and make noise as a protest. Remove belt and run motor for an hour or so on its own. If it screams it's a motor bearing, if it doesn't scream it could still be either motor or arbor. Only real fix is replace faulty bearings, if they have skated the the balls and races will be damaged to some degree and cannot be trusted in the future.
I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
13th December 2020, 08:03 PM #3
Thank you, will get onto this tomorrow. who would redo bearings? I realise this will need to wait until after new year....I can live with that. but yikes sounds expensive.
I would love to grow my own food, but I can not find bacon seeds
-
13th December 2020, 09:24 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,035
The arbor bearings are quite easy to do yourself, if it's the motor best to call on the professionals at a motor rewinders if you're doubtful about your abilities.
-
10th April 2021, 07:28 PM #5
well gents long time between drinks, I kept putting this off as I was concerned about my capabilities of pulling something apart and getting back together with spare bits lying around.
So where would I find a technical drawing of under the table. Bug*****ed if I can shift the bolt holding the motor adjustment.
As I first mentioned about being stored etc I can see rust on the motor pulley wheels. Would it be wise to strip underneath down and check everything> thats why a tech instruction book/manual would help.
Ahem I am old school and nearly always read instruction manualsI would love to grow my own food, but I can not find bacon seeds
Similar Threads
-
TSC10-HB & Incra
By MurrayD99 in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 27th July 2017, 03:41 PM -
TSC10 Splitter
By dazzler in forum HAND TOOLS - POWEREDReplies: 7Last Post: 3rd June 2007, 09:40 PM -
JET and TSC10 owners united!
By dazzler in forum HAND TOOLS - POWEREDReplies: 8Last Post: 22nd March 2007, 04:07 PM -
TSC10-HB Wings
By burn in forum HAND TOOLS - POWEREDReplies: 1Last Post: 29th October 2005, 10:52 PM -
Delta Sliding Table on TSC10-HB
By B.J.Honeycut in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 15th June 2005, 04:21 PM