Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: Unloading a Tablesaw
-
25th January 2013, 11:56 AM #16GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,560
Hang an endless chain from the ridge, reverse trailer into shop, tom the ridge each side of the trailer, attach slings to saw and lift enough to clear trailer floor, move trailer clear and lower the saw.
If the roof caves in, at least you now have the tools to fix it
-
25th January 2013 11:56 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th January 2013, 12:40 PM #17SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
With my Laguna which weighs 227kg I hooked the endless chain on the ridge with a small length of chain and a shackle near an adjacent steel A frame supported with with two 4x2 posts. Lifted off without any dramas.
Safari
-
25th January 2013, 12:55 PM #18
I had my SB-12 Woodman loaded in the side door of a hire van at the truck depot where it was delivered. I then placed a steel ladder as a ramp on the step below the side door and slid it off right into my shed!
Best of luck
-
27th January 2013, 11:14 AM #19New Member
- Join Date
- Jan 2013
- Location
- sydney
- Posts
- 1
hire a frame and chainblock from kennards
Drive under and liftoff the saw then drive away
-
1st March 2013, 08:23 PM #20
Saw unloaded. I ended up using a engine crane which I acquired from Gasweld. It was a little crude but it worked.
More pics on the blog ~ the love of wood ~My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/
Similar Threads
-
Tools needed for unloading and setting up an AL340D or similar
By 19brendan81 in forum METALWORK FORUMReplies: 30Last Post: 19th December 2011, 03:52 PM -
Unloading new machinery
By jimc in forum WOODWORK - GENERALReplies: 33Last Post: 13th July 2011, 10:32 PM -
New Tablesaw
By Woodlee in forum TABLE SAWS & COMBINATIONSReplies: 43Last Post: 12th May 2011, 06:50 AM -
Unloading heavy crates from trailer
By MGR in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 21st November 2007, 10:19 AM