Thanks: 0
Needs Pictures: 0
Results 1 to 2 of 2
-
26th July 2020, 01:58 AM #1
For those who have upgraded the Hammer K3 cross cut fence stop ...
If you have upgraded the fence stop, this is what you now have ...
I made the swap about a year ago, and wondered what I could do with the old stop. Then it dawned on me that it could be used as a stop - not for the cross cut, but for the mitre.
Set up the mitre accurately ...
Now install the stop behind the fence ...
When not in use, it drops away ...
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
26th July 2020 01:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th July 2020, 09:44 AM #2Senior Member
- Join Date
- May 2009
- Location
- Peoples Republic of Bryn
- Posts
- 393
Nice work Derek,
I changed my old fence stop out a few weeks ago and its been sitting on the bench.
Look like i found a new use for it
Similar Threads
-
DRO on K3 Hammer Cross Cut Fence
By Chris Parks in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 5th October 2019, 06:18 PM -
Anyone upgraded to the Hammer N440?
By waveink in forum BANDSAWSReplies: 4Last Post: 2nd February 2013, 11:28 AM -
Cross Slide Threading Stop
By Anorak Bob in forum METALWORK FORUMReplies: 27Last Post: 29th May 2011, 04:56 PM -
cross pein hammer what weight is best for rivets
By woodhog in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 5th February 2011, 08:51 PM