Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Wadkin Bursgreen alginment issue
-
16th July 2018, 09:57 PM #1Intermediate Member
- Join Date
- Nov 2016
- Location
- Melbourne
- Age
- 37
- Posts
- 37
Wadkin Bursgreen alginment issue
Gday all,
For a while now, ive had my wadkin 10AGS. Its never cut well. (Burning when ripping) So today I decided that I would do it properly, (align the blade to the mitre) which is fine I did that with the blade fully extended up. Between 0.01 front to back.
The issue is when I lower the blade, the blade becomes out of alignment. Between 0.28 and 0.35mm out of being true.
So i thought, it must be the trunnion. But I cant see anything in the saw or on the internet that would adjust it to true it up. Does anyone have any ideas.
I should also note, that spindle mounting casting has been welded, pretty good job but im a but suspect that it might, might be warped.
Its got me stomped.
Sent from my SM-G950F using Tapatalk
-
16th July 2018 09:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
wadkin bursgreen 10" table saw
By jrock_au in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 48Last Post: 25th July 2017, 09:30 AM -
Wadkin Bursgreen BZB 20/500 Bandsaw
By camoz in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 12Last Post: 17th June 2013, 10:36 PM