Gday all,

For a while now, ive had my wadkin 10AGS. Its never cut well. (Burning when ripping) So today I decided that I would do it properly, (align the blade to the mitre) which is fine I did that with the blade fully extended up. Between 0.01 front to back.

The issue is when I lower the blade, the blade becomes out of alignment. Between 0.28 and 0.35mm out of being true.

So i thought, it must be the trunnion. But I cant see anything in the saw or on the internet that would adjust it to true it up. Does anyone have any ideas.

I should also note, that spindle mounting casting has been welded, pretty good job but im a but suspect that it might, might be warped.

Its got me stomped.

Sent from my SM-G950F using Tapatalk