Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: absolute neewbie
-
24th May 2012, 12:36 PM #1New Member
- Join Date
- May 2012
- Location
- murrumba downs
- Posts
- 2
absolute neewbie
after reading every thread (and now having square eyes )on thicknesser jointer combos and how to set them up, the pending delivery of my new Carbatec 10 inch spiral head combo has rapidly gone from eager anticpation to absolute panic .
phrases like coplanar gibs for adjustment and straight edges now send me into fevered panic attacks .
Even Carbatec themselves aknowledge the instructions are poor so what chance someone like my self has to get it right has become a concern .
Never used one let alone set one up .
Any advice that i can understand would be greatly appreciated ,please remember i have no idea in your advice, or i could become even more confused (not that it takes much now days) .
-
24th May 2012 12:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th May 2012, 01:51 PM #2Senior Member
- Join Date
- Dec 2011
- Location
- Trevallyn
- Posts
- 112
I believe the Carbatec are rebadged Grizzly machines, when recently putting together my jointer, I looked on the Grizzly site and while there were minor differences between the machines, there was enough information between the two manuals to get it put together.
-
24th May 2012, 02:03 PM #3New Member
- Join Date
- May 2012
- Location
- murrumba downs
- Posts
- 2
funny you should mention that the guy at carbatec hinted that they did have a more detailed guide i have printed off a copy from grizzly as you said there are quite a few differences ,so i was alittle nervous if i had the right machine
thanks for taking the trouble to reply much appreciated
Similar Threads
-
Absolute must have now at Lee Valley
By Groggy in forum DUST EXTRACTIONReplies: 23Last Post: 3rd April 2012, 12:38 PM -
Absolute bargain!
By aussiejoeblow in forum METALWORK FORUMReplies: 41Last Post: 9th July 2011, 12:16 AM -
Another Melbourne neewbie
By Newoodworker in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 8Last Post: 7th February 2011, 07:26 PM -
Another absolute beginner.............
By HiString in forum WOODTURNING - GENERALReplies: 1Last Post: 15th July 2005, 12:52 AM -
Absolute beginner needs tool help, and more...
By tiki in forum HAND TOOLS - POWEREDReplies: 1Last Post: 22nd July 2003, 11:58 PM