Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: carbatec 15 inch planer
-
9th September 2020, 12:19 PM #1Intermediate Member
- Join Date
- Jul 2008
- Location
- s e qld
- Posts
- 47
carbatec 15 inch planer
Having trouble with holding the ajustment of the lower rollers. Have set to required height & tightened holding screws a number of times. Lasts only several weeks then drops again. Worried if I fix it with a locking solution can the eccentrics keep working loose. Any help appreciated
-
9th September 2020 12:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th September 2020, 04:13 PM #2SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
Does your thicknesser have excessive vibration? As the mechanism isn't very complicated and if the grub screws are working themselves loose i'd be addressing whats causing it. If not bit of loctite wouldn't hurt
-
9th September 2020, 04:29 PM #3Intermediate Member
- Join Date
- Jul 2008
- Location
- s e qld
- Posts
- 47
Thanks mate, that makes sense to me. Will go ahead and loctite it. Cheers
Similar Threads
-
Planer/jointer MANUAL required - Carbatec CTJ-196 (6 inch)
By Stewey in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 18th October 2020, 07:07 PM -
Carbatec CTJ-340 12.5 inch portable planer/ thicknesser - Switch and operation
By lawqbarr in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 25th April 2018, 02:46 PM -
Carbatec CTJ-340 12.5 inch portable planer/ thicknesser - Switch and operation
By lawqbarr in forum GENERAL & SMALL MACHINERYReplies: 0Last Post: 23rd April 2018, 09:23 AM -
Carbatec 16 inch
By Strungout in forum SCROLLERS FORUMReplies: 3Last Post: 25th July 2010, 11:05 PM