Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Carbide inserts
-
15th September 2021, 06:34 AM #1Senior Member
- Join Date
- Mar 2014
- Location
- NZ
- Posts
- 157
Carbide inserts
Are these inserts available? For the Hafco T20-s and T380-s thicknessers.thicknesser inserts.jpg
-
15th September 2021 06:34 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th September 2021, 07:28 AM #2GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
I have boxes and boxes of them for sale that i picked up at an auction. $20 per 10 plus postage.
-
15th September 2021, 08:58 AM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
No you don't, they're a different size.
Flintlock, the inserts you've provided the drawings for appear to have a radiused edge but I can't see anything on the drawing to indicate whether it's a 100mm or 150mm radius. Try SJE - Byrd, CTS, Carbatec, Hafco, Felder Spiral/Shelix/Helix cutter head carbide inserts/knives/blades - he will be able to help you if you send him a message. They may be the same as the Shelix uses.
-
15th September 2021, 12:47 PM #4Senior Member
- Join Date
- Mar 2014
- Location
- NZ
- Posts
- 157
Do you know what grade of carbide they are?
-
15th September 2021, 12:51 PM #5Senior Member
- Join Date
- Mar 2014
- Location
- NZ
- Posts
- 157
The figure at the top left of the insert. Is that Dia. 197? Which would be close to 100mm Radius.
-
15th September 2021, 01:00 PM #6GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
That is probably the case. The carbide grade is KO1. These ones may fit - Byrd Shelix Cutterhead Carbide Inserts. Best to check with Steve at SJE to confirm the fitment, he's a member on here and plenty of other forum members sing his praises.
-
15th September 2021, 01:54 PM #7
Plus one for Steve at SJE Tools...
https://www.woodworkforums.com/members/27755-sje-tools
Shout-out to SJE Tools - planer carbide inserts
Contact us
-
15th September 2021, 01:56 PM #8GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
-
15th September 2021, 02:26 PM #9GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
-
15th September 2021, 05:34 PM #10GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
I’m FAR from being an expert, having not ever seen or used an “accucut” head that I can remember, let alone never suggesting that some of the thousands of inserts I have may or may not fit one. But that’s ok, I just thought that the good folk here on the forum may be interested in buying some, up to them to work out if they fit or not, which is why I just posted a few to Tony in Ballina so he could try them, free of charge. But I guess it’s ruffled someone’s feathers or maybe threatened them, either way I’m not concerned, I’ll sell the rest of what I have on another platform.
Many thanks to those who have purchased and I wish you good luck and safe working.
-
15th September 2021, 07:28 PM #11GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
PM sent.
-
11th November 2021, 09:15 PM #12Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
They are 15x15x2.5R100 inserts - currently only got 20 or inserts in left in stock after a large order wiped out most of the stock Extra stock will be available in a week or 2 (as I am getting some router bits also made at the same time . . . so gotta wait on them!)
The radius in that diagram is easy enough to tell as there is 0.27mm difference between the peak of the radius and the corner.
Similar Threads
-
Carbide inserts
By redlaci2004 in forum WOODTURNING - GENERALReplies: 4Last Post: 11th May 2012, 12:43 PM -
Carbide inserts
By stockk1 in forum WOODTURNING - GENERALReplies: 6Last Post: 25th January 2012, 04:03 PM -
Carbide inserts.... again
By eskimo in forum METALWORK FORUMReplies: 11Last Post: 10th July 2010, 10:44 AM -
carbide inserts
By eskimo in forum METALWORK FORUMReplies: 1Last Post: 11th June 2010, 06:25 PM