Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: CTJ 680 on 10amp power supply
-
2nd November 2008, 02:56 PM #1Intermediate Member
- Join Date
- Aug 2008
- Location
- Melbourne
- Posts
- 49
CTJ 680 on 10amp power supply
I am looking at the Carbatec 15" thicknesser CTJ 680, but am restricted to a domestic 10amp power supply.
the specs say 15amps, but has anyone run this machine on 10amps successfully?
I am not looking for a lot of throughput, more quality of finish and reliability.
-
2nd November 2008 02:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th November 2008, 03:32 PM #2
Not a hope in hell. Start-up will pop the fuse/circuit breaker and switching to a more powerful breaker will only mean you run the risk of damaing something else....either the motor or the house wiring.
Running a new 15A circuit is not a difficult thing to organise........unless, of course, you are renting.
We had a dedicated 15 amp circuit installed in our shed for just this purpose.Ours is not to reason why.....only to point and giggle.
-
7th November 2008, 05:03 PM #3
-
7th November 2008, 05:12 PM #4
I have had no trouble running mine from a standard 10A outlet. You do need to be a little careful/aware of whatever else might be on the same circuit if you don't want to trip the circuit breaker.
-
7th November 2008, 10:26 PM #5
At my old place I used to run the same machine and a dust extractor on the same 10 amp circuit. I'd start the thicknesser up first and then the dusty. The only times the circuit breaker popped was when I'd forgotten to turn off the compressor and it tried to cut in at the same time.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
10th November 2008, 12:49 PM #6Intermediate Member
- Join Date
- Aug 2008
- Location
- Melbourne
- Posts
- 49
thanks everyone for your comments and advice.
I didn't buy the thicknesser in the end, as the price went up $500 and I figured the risk v requirement equation did not justify it.
Similar Threads
-
power supply
By tleah in forum CNC MachinesReplies: 11Last Post: 1st November 2008, 02:38 PM -
Power Supply Wanted......
By Landseka in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 1st June 2006, 01:16 PM -
Questions on power supply
By Arron in forum HAND TOOLS - POWEREDReplies: 9Last Post: 1st January 2004, 02:01 PM