Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Finally got to try the GMC
-
24th June 2009, 08:45 PM #1
Finally got to try the GMC
When Bunnies had a special a few years back on the GMC thicknessers, I couldn't resist buying one, especially when my son was working there and I got it even cheaper Not that I needed one, but I'm a tool addict and at $180 brand new, what the heck. Well it has been sitting in my workshop on the tablesaw collecting dust waiting for me to make a chip collector for the DC .
I am currently making a turned cheese platter with an end grain board in the middle. I had some 30x25 Zebrano lengths dressed on 2 sides. I glued up enough lengths to cut them up and re-glue them for the board. So out came the thicknesser and I ran them through so it was 25mm thick, and when cut up, the board will have 25x25 end grain pieces. I also left one of the pieces long to hopefully minimise snipe.
It worked a treat, no snipe and smooth square finishNeil____________________________________________Every day presents an opportunity to learn something new
-
24th June 2009 08:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th June 2009, 10:42 PM #2
I bought one at the time and paid the FULL $199. Have used it a few times and have always had good results. It was purchased a secondary thicknesser to my CTJ-381. I also thought that at the price I could not let it go.
Les
-
25th June 2009, 11:24 AM #3
I had one - well, have one that is in serous need of reconditioning... Any intrepid adventurer down here in Tassie want an OLD GMC thicknesser?
Anyway, it server me very well for years and I have done everything on it from 11" boards down to very thin laminations for bow making. It is an OK machine and a great machine for the price.
However, a few things:
1. Make sure that you wax the bottom table - mine is a bit grippy now.
2. Don't try to take off too much in a single pass (but that is just common sense).
3. Check your work periodically - mine has now gone out of square and I only noticed after thicknessing quite a lot of pine one day...
Cheers
Cam<Insert witty remark here>
-
25th June 2009, 01:50 PM #4
Agree with your other points, but not waxing, as it can affect your finishing. I use a spray on teflon product, on all my machinery sliding surfaces, works a treat.
Neil____________________________________________Every day presents an opportunity to learn something new
-
25th June 2009, 02:26 PM #5<Insert witty remark here>
-
25th June 2009, 09:26 PM #6
-
28th June 2009, 03:47 AM #7SENIOR MEMBER
- Join Date
- Jul 2008
- Location
- Meadow Springs, WA
- Age
- 76
- Posts
- 574
Similar Threads
-
Finally getting right
By Old Paul in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 11th September 2008, 10:01 PM -
I finally got it right!!
By funkychicken in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 6th September 2008, 09:02 PM -
Finally...
By Steve Fryar in forum SMALL TIMBER MILLINGReplies: 4Last Post: 16th August 2008, 10:56 AM -
1st x-cut...FINALLY
By vantoo in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 14th August 2008, 07:42 AM