Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
2nd April 2013, 11:24 PM #1New Member
- Join Date
- Mar 2013
- Location
- whitegume valley
- Posts
- 2
old hafco hare and forbes thicknesser parts?
Hi all
My old Hafco 12 inch has done about 15 years of light work, the cogs that drive the chains for the feed rollers have died. I have bought something decent, but would like to replace the cogs and give the machine to a friend. The machine is pretty generic, came out under several names.
Hare and Forbes parts page does not list replacements for that model. Anyone got any ideas or a dead machine that they are willing to sell some bits from?
cheers
Steve
-
2nd April 2013 11:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Tom Hare, founder of Hare and Forbes, has died.
By Old farmer in forum WOODWORK - GENERALReplies: 2Last Post: 8th May 2012, 11:52 AM -
Hare & forbes T-318 thicknesser
By Lyle in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 25th January 2010, 10:52 AM -
Hare and Forbes HAFCO PD-22 Review
By Col in forum GENERAL & SMALL MACHINERYReplies: 27Last Post: 28th July 2009, 11:23 PM -
carba-tech-Hare&forbes thicknesser
By haosiliu235 in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 23rd December 2008, 06:16 PM -
Review - Hare & Forbes (HAFCO) P150 Jointer
By silentC in forum HAND TOOLS - POWEREDReplies: 16Last Post: 8th September 2005, 08:34 PM