Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
4th November 2007, 11:23 PM #1Novice
- Join Date
- Nov 2007
- Location
- blaxland
- Posts
- 20
Holz-Profi Jointer Blade Replacement
I have 4yr old Holz Profi 300mm planer/thicknesser and am finally getting round to replacing the ordinary German blades with some new 3mm thick HSS blades.
Getting the old 'factory' blades out, wasn't too difficult, they were firm fit, but eventually levered out ok. With each of the 300mm blades is a right angle bracket, and an allen keyed tightening block; plus two springs and 2 plastic plugs .
However putting the whole thing back together is becoming a nightmare. Its impossible to see if the springs have seated themselves in their proper position beneath the blade. What is worse is that the new 3mm hss blade seems to be about .25mm thicker than it should be, ie to fit smoothly into the cutter head slot beside the securing brackets/blocks. I've bought the magnetic blade setter kit but it hasn't got any chance of 'gently' adjusting blade height.
Is anyone familiar with replacing cutter blades on this type of machine?
Anyone know of a translated Holz Profi manuals?
-
4th November 2007 11:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th November 2007, 05:32 PM #2Novice
- Join Date
- Nov 2007
- Location
- blaxland
- Posts
- 20
Blade changing
The planer/thicknesser is model number 310-stp-v. All contributions gratefully accepted.
-
8th November 2007, 05:37 PM #3
Try sending a PM to Zed, he may be able to help.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
8th November 2007, 06:54 PM #4
PM me your emamil address - the word doc is about 1.4meg. PS the doc is a piece of sheet.
speak to gumby about getting a copy of the wwf vids. grab my video about jointer setting with magnets. better than any friggen jig.....Zed
-
20th January 2008, 09:16 PM #5Novice
- Join Date
- Nov 2007
- Location
- blaxland
- Posts
- 20
This is fixed. Holz Profi factory blades are 2.85mm [though labelled as 3.0mm]. I had the gibs machined down by 0.15 mm to fit standard 3.0mm hss blades. I then used 400 wet/dry to gently smooth all sharp angles and drowned everything in oil. I removed troublesome springs from beneath blades and used an magnetic blade setting jig to hold up a suitable blade height. It works...bleeding obvious really.
Similar Threads
-
Lie-Nielsen 271 Small Router Plane – A Review
By Mirboo in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 10th January 2007, 02:45 AM -
jointer blade setter jig?
By Farm boy in forum HAND TOOLS - POWEREDReplies: 6Last Post: 5th January 2007, 07:21 AM -
jointer blade angles
By morry in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 23rd April 2004, 02:44 PM -
Blade setting in jointer, planer, thicknesser
By Cliff Rogers in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 17th March 2004, 06:16 PM -
Blade Height Winder Review
By Noel Butcher in forum TRITON / GMCReplies: 6Last Post: 13th May 2000, 02:31 PM