Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    156

    Default Locating pins on thicknesser cutterhead

    Hi everyone, my circa 1994 Benchtop thicknesser has died this morning quite a horrible death I might add. Smoke, leaking some sort of fluid and sparks.
    Well I like the aftermarket Italian blades that I purchase from my sharpening service. Thet are a straight blade with no locating holes in them.
    I have noticed that a lot of the more recent mahines have some sort of locating pins on the cutterhead where the blades are aligned.
    I don't want this as i set mine with a jig and the Italian blades would not be able to be used.

    Are the locating pins/grub screws able to be removed or are they pressed in or manufactured with the pins in place?

    For a reference I am looking at the Chinese MB 1931, in this case one manufactured for Tradetools.

    https://www.tradetools.com/product-range/power-tools/stationary-power-tools/renegade-12-1-2-planer-thicknesser-1500w-2hp-3mm-cut

    Kind regards Tony
    Last edited by tomartomau; 5th May 2018 at 03:47 PM. Reason: Adding text

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    3,298

    Default

    Why just replace the capacitor on the one you have

  4. #3
    Join Date
    Feb 2014
    Location
    Bne
    Posts
    156

    Default

    Good point. I will have a look

  5. #4
    Join Date
    Jun 2019
    Location
    Rockhampton
    Posts
    1

    Default

    Tomartomau - did you end up buying the Renegade thicknesser?

Similar Threads

  1. Retrofitting CTS spiral cutterhead to Carbatec CTJ-680 15" thicknesser
    By doug3030 in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 19
    Last Post: 25th Sep 2015, 04:48 PM
  2. Old Wolfenden 24" thicknesser with square 4 blade cutterhead?????
    By hugh reid2 in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 3
    Last Post: 6th Jun 2014, 10:29 AM
  3. Upgraded cutterhead for Durden Thicknesser
    By ssellar in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 2
    Last Post: 3rd Apr 2011, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •