Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Join Date
    Nov 2013
    Location
    Eltham, VIC
    Posts
    65

    Default Luna jointer / thicknesser - user manual?

    Hi All,
    I bought an old Luna L38-310 combination thicknesser / jointer a couple of months ago. I am very happy with the build quality, weight and simple engineering in the old Luna, and it is performing well after having the knives sharpened. However I'd like to know a little more about the machine (maintenance and adjustments) and wondering if anyone here might have the user manual for the Luna series? I believe the manual is common between the various sizes and it was also part of the W59 / W69 series of table saw / spindle moulder machines.
    If anyone might have a copy laying around that I could borrow and scan it would be greatly appreciated! I have inquired with the original manufacturer for Luna in Sweden (called l Ejca, who still make this machine), and they are willing to supply a hard copy but the postage from Sweden makes it quite an expensive exercise.
    I also welcome any general thoughts / tips for the Luna machines. Dust extraction looks like it wasn't considered "in the day" and I have just cobbled together some dust hoods from plywood for the short term.
    I'm in Eltham (VIC) but happy to cover any costs for postage in Aus.

    Thanks, Liam.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2008
    Location
    Sydney - North Shore
    Posts
    117

    Default

    PM sent.

    John

  4. #3
    Join Date
    Nov 2013
    Location
    Eltham, VIC
    Posts
    65

    Default

    Thanks John

  5. #4
    Join Date
    Sep 2016
    Location
    Brighton East, Vic.
    Age
    74
    Posts
    2

    Default

    Hi John. I am also in need of the Luna L38 user manual so that I can replace the cutter head on my machine. Were you able to help Liam out? Regards Christopher

  6. #5
    Join Date
    Nov 2013
    Location
    Eltham, VIC
    Posts
    65

    Default

    Hi Christopher, I can forward you the manual that John gave me. PM me your email address if you would like it. Cheers.

  7. #6
    Join Date
    Sep 2016
    Location
    Brighton East, Vic.
    Age
    74
    Posts
    2

    Default

    Thanks Liam. Pm'ing you now.

  8. #7
    Join Date
    Oct 2014
    Location
    Victoria
    Posts
    5

    Default

    I am also in need of the Luna L38 user manual. Can anyone help out?
    Thanks

  9. #8
    Join Date
    Jul 2017
    Location
    Nsw auatralia
    Age
    36
    Posts
    2

    Default

    Hi guys. I've just acquired an old luna L38. Was wondering if I could get the manual sent to me. Thanks in advance.

    [email protected]

  10. #9
    Join Date
    Jan 2018
    Location
    orange nsw
    Posts
    1

    Default

    Hi guys have just purchased a Luna L38 Jointer thicknesser Could i get a copy of the manual to please

  11. #10
    Join Date
    Jan 2019
    Location
    Melbourne
    Age
    50
    Posts
    5

    Default

    Hi everyone . I am selling a Luna L38 / 310 which belonged to father . I wondering if anyone can help me with info , a copy of manual and the value . It's in good Nick and been storage for last 20 years . Built 1985 . Any help would be greatly appreciated .

  12. #11
    Join Date
    Nov 2013
    Location
    Eltham, VIC
    Posts
    65

    Default

    Hi michaelwwalsh88, it's a nice solid unit and mine is still going strong. The original manufacturer in Sweden is still making them today as far as I know (with some minor improvements) https://www.ejca.se/produkter

    I've just uploaded the manual here: Luna W and L series manual (which was given to me by aussiepens above)
    As for the value, I'm not too sure sorry. I paid around $1000 for mine back in 2015 but I couldn't tell you if that was a good/bad price. It was just around the corner from my house and felt like a solid machine (and was cheaper than a good new unit) so I bought it...

  13. #12
    Join Date
    Jan 2019
    Location
    Melbourne
    Age
    50
    Posts
    5

    Default

    Thanks very much.

  14. #13
    Join Date
    Jan 2019
    Location
    Melbourne
    Age
    50
    Posts
    5

    Default

    $1000 is what I'm looking for

  15. #14
    Join Date
    Nov 2020
    Location
    North Warrandyte
    Age
    48
    Posts
    2

    Default

    Hi Liam,
    I'm keen to find a manual for a luna W59, hoping you had success and could share with me? P.S. am just around the corner in Nth Warrandyte. Cheers

  16. #15
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

    Default

    Quote Originally Posted by Sam Innes View Post
    Hi Liam,
    I'm keen to find a manual for a luna W59, hoping you had success and could share with me? P.S. am just around the corner in Nth Warrandyte. Cheers
    Quote Originally Posted by Binary01 View Post

    I've just uploaded the manual here: Luna W and L series manual (which was given to me by aussiepens above)
    ..
    ...
    Cheers

    DJ


    ADMIN

Page 1 of 2 12 LastLast

Similar Threads

  1. User Manual Woodman AP220 20" Thicknesser
    By fishflog in forum GENERAL & SMALL MACHINERY
    Replies: 0
    Last Post: 4th March 2014, 10:47 AM
  2. User manual for a Talon thicknesser
    By Pancake in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 2
    Last Post: 16th August 2010, 10:17 PM
  3. User Manuals Carbatec thicknesser & jointer
    By snapman007 in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 1st October 2008, 06:35 PM
  4. User manual for the Elu DAH 176
    By Yacov Lev in forum HAND TOOLS - POWERED
    Replies: 0
    Last Post: 15th November 2006, 02:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •