Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
4th June 2015, 01:17 PM #1Intermediate Member
- Join Date
- May 2015
- Location
- perth
- Posts
- 27
ryobi thicknesser 318mm 2000w manual for blade change?
I was gifted a ryobi thicknesser with a spare change of blades but no user manual.
does anyone have a quick list or a copy of the procedure?
the blades in it are fine for now but they're going to need changing/reversing at some point and I'd like to be prepared.
cheers,
shawn
-
4th June 2015 01:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th June 2015, 02:52 PM #2
Hi,
Try
http://manuals.ryobitools.com/docume...y_id=39&query=
but you will need the model number.
RegardsHugh
Enough is enough, more than enough is too much.
-
4th June 2015, 04:29 PM #3Intermediate Member
- Join Date
- May 2015
- Location
- perth
- Posts
- 27
I can't believe I got an answer so quick!
thank you very much, sir!
now I'll go wipe the rest of the sawdust off it and find that number...
cheers,
shawn
-
5th June 2015, 09:49 AM #4
Did your thicknesser come with the blade setting jig? That is an important part for replacing the blades.
Blade setting jig.JPG
This link might help if you have the model I think it is.
http://www.manualslib.com/manual/143...bi-Ap13ak.html
Page 8 shows how it is done. Be careful not to turn the cutter head over after removing the blades and lock bar, as the little springs below the blade can fall out and disappear.Last edited by Treecycle; 5th June 2015 at 09:53 AM. Reason: Add link
-
26th June 2015, 10:16 PM #5Intermediate Member
- Join Date
- May 2015
- Location
- perth
- Posts
- 27
I just got it back from a mate, wiped the dust off it and found it is an ozito.
the blades are ryobi, mind.
disclaimer: I'm a makita man myself.
question remains unfortunately.
-
26th June 2015, 11:39 PM #6
Same procedure for all I think.
Similar Threads
-
GMC 2000W 318mm Planer/Thicknesser
By bacdj in forum TRITON / GMCReplies: 6Last Post: 23rd May 2011, 07:08 PM