Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2021
    Location
    Sydney
    Posts
    54

    Default Sherwood Helical Upgrade in other Benchtop Thicknessers

    Sherwood sell replacement/upgrade helical shafts for a pretty price.
    https://www.timbecon.com.au/spiral-c...erwood-planers
    Has anybody put the 13" lunchbox benchtop thicknesser cutterhead into another unit?
    The reason I ask is I have the Bayer brand 13" thicknesser which looks identical to the Sauber and Sherwood non-helical 13" models. I imagine they're straight out of the same factory. I am not sure if there is a difference between the helical cutterhead and the standard 2/3 blade cutterheads though.
    Has anybody done the helical upgrade to a lunchbox thicknesser or compared the interiors of Sherwood standard and helical models?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    4,882

    Default

    I put one in my dewalt 735 about 6 months ago. It is however made for that machine. I think as your machine is not a sherwood or dewalt you need to make sure all the measurements match up. The ones you are talking about sherwood say for sherwood machines only. Exact width, bearing inside and outside diameters and does the pulley fit on the shaft. Expensive mistake if it does not fit.
    Regards
    John

  4. #3
    Join Date
    Jan 2017
    Location
    Brisbane
    Posts
    6

    Default

    Hi royourboat - Suggest contact with below, who I have had good service from - albeit for a jointer cutter head change - note they also cover thicknessers in their offering

    Hope this assists
    mark

    Robert GregoryR.D.G. International Agencies
    T/a Woodcraft Supplies
    PO Box 12
    Howard QLD 4659
    Phone: (07) 4129 4644
    Mobile: 0418 184 048
    Email: [email protected]

Similar Threads

  1. Sherwood 13inch Benchtop Thicknesser with Helical Head
    By davewicks28 in forum PRODUCT REVIEWS
    Replies: 4
    Last Post: 1st May 2022, 10:15 AM
  2. A(nother!) Dewalt Dw735 vs Sherwood Helical question
    By timelord9 in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 4
    Last Post: 9th February 2022, 04:58 PM
  3. Carbatec Vs Jet Vs Hafco Benchtop Thicknessers. Which one?
    By metester in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 16
    Last Post: 30th June 2021, 08:20 AM
  4. Q's About 8" Helical Head Upgrade on CTJ-350
    By Phil Mailloux in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 10
    Last Post: 24th November 2019, 10:09 PM
  5. Helical thicknessers - help me choose between CT/Sherwood/Powermatic
    By bueller in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 30
    Last Post: 17th June 2017, 01:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •