Thanks: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Tanner Thicknesser
-
18th July 2009, 07:35 PM #1New Member
- Join Date
- Jul 2009
- Location
- Gawler, South Australia
- Posts
- 1
Tanner Thicknesser
I recently purchased a circa 1950 Tanner Thicknesser. It's in good condition but in need of some maintenance and adjustment. Is it possible to still obtain a copy of an owners / service manual?
-
18th July 2009 07:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th February 2016, 12:02 AM #2Novice
- Join Date
- Nov 2009
- Location
- Perth
- Posts
- 10
G’day there Ian T – greetings from the West across the Nullarbor in Perth – just wondering if you ever got any follow up info re your quest for information on your Tanner (NZ) thicknesser m/c ??? re getting a copy of the Owner’s manual etc.,
I have one of these solid m/c’s which I have owned for many years now – it was bought at auction for a interim purposes subject to getting a wider m/c later down the track – but over the years I have found that the machine does all I want of it re thichnessing and you don’t see too much timber these days greater than the old 12 inches wide stuff - the machine has done a sterling service over the years Cheers and regards Bruce
-
29th March 2016, 09:21 PM #3
Hi sheoak17, glad to hear that the tanner 6" is ok. I just picked up one for free from Gumtree it has been left out in the rain for a bit. But the bearings are still good, motor was seized 1/2 HP I will pull it apart and have a look. What size motor does your have?
Wife said something about me just saving the seller a trip to the tip. )
Similar Threads
-
Which Thicknesser Now
By oldbill51 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 11Last Post: 18th December 2008, 09:31 AM -
Wet Thicknesser
By Howdya do that in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 13th February 2007, 08:54 AM -
Thicknesser or Planer Thicknesser (Jointer)
By Markw in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 9th November 2006, 01:58 PM -
Thicknesser
By maglite in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 1st June 2005, 12:09 PM -
Tanner thicknesser
By rev in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 25th September 2003, 12:33 AM