Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
21st May 2013, 05:26 PM #1Intermediate Member
- Join Date
- Mar 2010
- Location
- Canberra, ACT, Australia
- Posts
- 39
Thickness Planer Auxilliary Table
I recently saw a short article on an auxiliary table for a thicknesser. The table rested on the thicknesser table and extended for both an infeed and outfeed extension. The table had reinforcing on both the infeed and outfeed parts and had a cleat on the infeed side to hold in place.
I have not been able to re-locate the article and would be most grateful for any help I can get.
Regards
Peter Evans
-
21st May 2013 05:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th June 2013, 04:52 PM #2Member
- Join Date
- May 2010
- Location
- Sydney
- Posts
- 78
this of any help?
http://eberhardt.bz/GME_Wood_Land/GM...e011119042.pdf
-
4th June 2013, 04:57 PM #3Member
- Join Date
- May 2010
- Location
- Sydney
- Posts
- 78
what about this one?
http://www.finehomebuilding.com/PDF/Free/011183072.pdf
or
Auxiliary planer bed
-
4th June 2013, 04:59 PM #4Intermediate Member
- Join Date
- Mar 2010
- Location
- Canberra, ACT, Australia
- Posts
- 39
Thanks for the response. I've seen this one but it is not the approach I'm trying to locate.
Regards
Peter Evans
-
5th June 2013, 06:40 AM #5Intermediate Member
- Join Date
- Mar 2010
- Location
- Canberra, ACT, Australia
- Posts
- 39
Thanks again for the response. I have seen both of your suggestions before. The one I'm searching for is similar to the Auxiliary Bed but is longer and has stiffening pieces and a single cleat which butts against the in feed table.
Regards
Peter
Similar Threads
-
Thickness Planer
By Zoinker in forum WOODWORK - GENERALReplies: 1Last Post: 27th April 2011, 09:43 PM -
Heads up on thickness planer
By mugwoody in forum HAND TOOLS - POWEREDReplies: 5Last Post: 31st March 2007, 12:19 PM -
Thickness planer. Anything before I hit the switch?
By Schtoo in forum HAND TOOLS - POWEREDReplies: 16Last Post: 19th January 2006, 11:14 PM -
Thickness Planer
By laudesan in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 1st November 2003, 07:58 PM -
Thickness Planer
By barrysumpter in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 16Last Post: 4th June 2000, 11:46 PM